Printer Checkout (2524)

Printer Checkout
  1.  Make sure the printer is properly connected and power is switched on.
  2.  Run the printer self-test, if available. If the printer self-test does not run  correctly, the problem is in the printer. Refer to the printer service manual.
  3.  Disconnect the printer cable.
  4.  Select Parallel on the Test Menu and perform the parallel test, if  the printer is attached to the parallel port. If the test detects an error, replace the system  board. If the test runs error free, replace the printer cable, and check by the program which  may recreate the error. If the problem remains, replace the system board.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.