Memory Checkout (2523)
NOTE: Before removing a SIMM card, power-off the computer.
Error code 110 indicates that a parity check
error on the system board was detected.
The error is caused by the SIMM card or the system board.
To isolate the FRUs, remove the SIMM card and run the
memory test again.
- If an error occurs without the SIMM
card, replace the system board.
- Otherwise, replace the SIMM card.
The system board contains the first 4MB of the memory.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.