| Symptom/Error | FRU/Action |
|---|---|
| Continuous beeps. | 1. System Board |
| One beep and a blank, | 1. Reseat all LCD connectors. |
| unreadable, or flashing LCD. | 2. LCD Assembly |
| 3. Video Card | |
| 4. System Board | |
| 5. DC/DC Card | |
| One beep, and the message | 1. Boot device |
| 'Unable to access boot source' | 2. System Board |
| One long, two short beeps | 1. System Board |
| and a blank or unreadable LCD. | 2. Video Card |
| 3. LCD Assembly | |
| One long beep followed by | Connect the AC Adapter |
| four short beeps each time | or install a fully-charged |
| the power switch is operated. | battery. |
| (System cannot power-on due | |
| to low battery voltage.) | |
| One beep every second. | Connect the AC Adapter or install a |
| (System is shutting down | fully-charged battery (allows system to |
| due to low battery voltage.) | complete shutdown before changing the |
| battery). | |
| Two short beeps | POST error. |
| with error codes. | See 'Numeric Error Codes' |
| Two short beeps | System Board |
| with blank screen. |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.