Port Replicator Power Overload
Port Replicator Power Overload
If intermittent power shut-downs occur while using two or more PCMCIA devices
with a port replicator, suspect an over-current problem.
Some PCMCIA devices use more than the recommended maximum power. If
the maximum usage for each device occurs simultaneously, the
total current can exceed the replicator power limit, thereby
causing a power shut down.
Isolate this problem by removing one of the devices and using the computer
under the same condition to see whether a power shut down
occurs. Do this procedure for all devices, then determine the cause.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.