Power Systems Checkout
.Power Systems Checkout
To verify the symptom of the problem,
power-on the computer using each of the power sources
- Remove the battery pack, diskette drive, and hard disk drive.
- Connect the AC Adapter and check that power is supplied.
- Install the diskette drive, or hard disk drive
one at a time and check that power is supplied from
each power source.
- Disconnect the AC Adapter, remove the hard disk and
diskette drive, and install the charged battery pack,
then check that power is supplied by battery pack.
If you suspect a power problem, see the appropriate power supply
check listed below.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.