Port Replicator Power Overload
If power shut downs occur intermittently when using PCMCIA-2 devices
via a port replicator,
suspect an over-current problem.
Some PCMCIA devices use more power, if
the maximum usage of each device occurs simultaneously, the
total current will exceed the limit, thereby
causing a power shut down.
Isolate this problem by removing one of the devices, and use the computer
under the same condition to see whether a power shut down
occurs. Do this procedure for all devices, then determine the cause.
Use of the larger AC Adapter (50W, optional)
is recommended, if one is not yet in use.