Reading the PC Test Card LED
Reading the PC Test Card LED
The green LED on a PC test card
(JEIDA/PCMCIA wrap card)
turns on when the PCMCIA test
is running.
If the LED does not turn on,
check that the card is installed
correctly by reseating the card.
If it still does not turn on
after the card is reseated
and you are using one PC test card, try
using the other slot for the test.
If you are using two cards, try swapping the cards in the slots.
If the LED still does not turn on and the test fails,
replace the FRU shown in the diagnostics error code.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.