Intermittent system interruptions can be
a variety of reasons
that have nothing to do with a hardware defect, such as
electrostatic discharge or software errors.
Consider replacing a FRU
a recurring problem exists.
When analyzing the intermittent problem,
perform the following steps:
- Run the advanced diagnostics test in loop mode
at least 10 times.
- If no error is detected, do not replace any FRUs.
- If any error is detected, replace the FRU shown by the FRU code.
Rerun the test to verify that no more errors exist.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.