| Symptom/Error | FRU/Action |
|---|---|
| Power shut down during operation. | 1. Go to 'Power Systems Checkout' |
| 2. Battery Pack | |
| 3. Power sources | |
| 4. Top System Board | |
| The system will not power-off. | 1. If you are in Suspend mode, resume by |
| pressing Fn. Then try to | |
| power-off. | |
| 2. Disconnect the computer from ac power. | |
| 3. Remove the battery. | |
| 4. If problem occurs consistently, replace | |
| Top System Board. | |
| Battery pack charges, but the | 1. Reseat the Inverter Card. |
| battery status indicator | 2. Replace the Inverter Card. |
| does not light. | |
| Battery pack does not charge, | 1. Check the AC adapter connection. |
| the battery status indicator | Make sure that the computer is powered-on |
| does not light, and the battery | or in Suspend mode. |
| fuel gauge is less than 90%. | 2. Check the Configuration Utility to ensure |
| that the AC adapter is supplying | |
| the correct voltage level. | |
| 3. Check the AC adapter. | |
| 4. Make sure that the computer is within the | |
| operational temperature range. | |
| 5. Change the AC adapter. | |
| 6. Replace the Battery Pack. | |
| 7. Replace the Top System Board. |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.