Hard Disk Drive Checkout

Hard Disk Drive Checkout
  1.  Power-off the computer.
  2.  Insert the hard disk drive to be tested.
  3.  Power-on the computer.  Press the F1 key any time  while the POST memory count is proceeding.  When the memory test is completed, the Easy-Setup screen screen appears.
  4.  Press the left or right arrow key to  select Test and press Enter  or position the pointer over the Test icon and  click the left click button once.
  5.  Press Ctrl+A to enter advanced diagnostics.  and press Enter.
  6.  If the test detects an error, FRU code 60 appears  under the HDD-1 icon.  Replace the hard disk drive.
  7.  To exit from the test screen, press Esc.

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.