FRU Codes

FRU Codes

If an error is detected by the diagnostic tests, a four-digit   FRU code is displayed. The FRU code indicates two suspected FRUs. Replace the FRU that is indicated by the two leftmost digits   first, then replace the FRU indicated by the two rightmost digits  . No FRU is assigned to code 00. If only one FRU is suspected, the other FRU code is filled with zeros. See the referenced page before replacing the FRU.

FRU Code FRU/Action
10 System Board
20 Memory 'Memory Checkout'
30 Reserved
32 External Keyboard
33 External Mouse
40 LCD Assembly
45 External CRT
50 Reseat the Diskette Drive
Diskette Drive
60 Reseat the Hard Disk Drive
Hard Disk Drive
81 Internal Modem Card (if installed)
90 Reserved

NOTE: The device ID and error codes are used to indicate the detail portion of the FRU which caused the error. If replacing a FRU does not correct a problem, see the Device ID or error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed.

If the problem remains after replacement of the FRUs, go to 'Undetermined Problems'

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.