SEAGATE TECHNOLOGY, INC. 1-800-SEAGATE http://www.seagate.com (C)opyright 1999 ST-39175FC Fibre Channel FC-AL, Dual Port (Barracuda 18 LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ST-39175FC ÈÍÍÍÍÍÍÍÍÍÍͼ 40 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄ20/) BOTTOM Notes on 40 pin I/O connector: +12v = pins 2, 3, 4, 21 +5v = pins 19, 20, 40 GND = pins 6, 22, 23, 26, 29, 32, 35 Mating FC connector: AMP US p/n: 787317-1 straight-in, Male 40-pin ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-39175FC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ Reserved. Shipped with cover installed. Do not remove. Do not install jumpers ³ ÚÂÄÄÄÄ Reserved ³ ³³ÚÄÄÄ Fault LED ³ ³³³ÚÄÄ Port B Bypass LED ³ ³³³³ÚÄ Port A Bypass LED TOP (HDA) ÕØÍÍ͸ ³³³³1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ * BOTTOM ÔÍÍÍ;³³³ÀÅÙ ³ J6 ³³³ ÀÄÄ Ground LED ÄÙ ³³ÀÄÄÄÄ Active LED ³ÀÄÄÄÄÄ Ground ÀÄÄÄÄÄÄ Remote LED (pin-11 +5v) ST39175FC drives have two independent FC-AL ports. These ports may be connected on independent loops or on the same loop. Port A and Port B may be connected in any order or combination. ST-39175FC UNFORMATTED CAPACITY (GB) ________________10.8 FORMATTED CAPACITY (GB) __________________9.105 AVERAGE SECTORS PER TRACK ________________303 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________58,605 CYLINDERS ________________________________11,721 user HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM/MR RECORDING METHOD _________________________PRML 16/17 EPR4 INTERNAL TRANSFER RATE (mbits/sec)________137 to 240 INTERNAL FORMATTED TRANSFER RATE (MB/sec)_16.2 to 28.3 EXTERNAL TRANSFER RATE (mbyte/sec/port)___106.3 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER (/optional)________________________1MB/4MB Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________FC-AL Fibre Channel - Arbitrated Loop, ASA II BYTES PER TRACK __________________________186 KByte avg SECTORS PER DRIVE ________________________17,783,239 TPI (TRACKS PER INCH) ____________________12,580 BPI (PEAK KBITS PER INCH) ________________223 AVERAGE ACCESS (ms read/write)____________6.9/7.8 Drive level without controller overhead SINGLE TRACK SEEK (ms read/write) ________0.9/1.2 MAX FULL SEEK (ms read/write) ____________15/16 MTBF (power-on hours) ____________________1,000,000 SHOCK (G's, 11/2/0.5 ms): operating (Read/Write) __________5 abnormal ________________________10 nonoperating ____________________75/150/100 ACOUSTICS (Bels typical, sound power) ____4.2 POWER DISSIPATION (watts/BTUs) Active ____ Idle ______10.1/34.4 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.55 idle +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.70 idle IDLE (watts) _________ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.0/25.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146 Weight (lbs/kg): 1.3/0.589 Already low-level formatted at the factory with x spare sectors at the end of each x cylinder region. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (11/13/99)