Workstation for DOS IPX Client
                                                                    v3.04


NetWare* DOS IPX Client Driver Installation Notes for Intel's
EtherExpress(TM) PRO/10 ISA LAN Adapter
=============================================================

Location of Driver:     \DOS\IPX.COM


Quick Installation
------------------

Use the Auto Installation option in the SoftSet2 program.


Sample Configuration Files
--------------------------

AUTOEXEC.BAT:
   
   IPX
   NETX


General Installation
--------------------

Note:    If you are also running Windows* for Workgroups, please see the
         Hints and Tips section below for important information.

1  A pre-generated IPX.COM comes on the disk and will work with any
   configuration that the lan adapter is set at.

2  Copy IPX.COM and NETX.EXE from the \DOS directory to your boot disk,
   and add them to the AUTOEXEC.BAT or login batch file.


Hints and Tips
--------------

1  If the workstation can't find the file server

   The pregenerated IPX.COM on the diskette is configured for 802.3 frame
   type.  Be sure that 802.3 frame type is loaded and bound at the file
   server.  This is especially true with a NetWare 3.12 or 4.x file
   server since 802.2 loads by default, not 802.3.

2  If workstation requires 802.2 frame type

   IPX.COM only supports 802.3 and Ethernet_II.  You must use the ODI
   driver for 802.2 frametype.

3  If workstation requires Ethernet II frame type

   Use Novell's ECONFIG program to change the IPX.COM to Ethernet_II
   frame type.

4  If installing Windows for Workgroups and Novell NetWare

   You must install the DOS ODI client driver; the IPX.COM driver will
   not allow support for Windows for Workgroups.

   To install proper driver support for Windows for Workgroups and Novell
   NetWare on the same workstation, follow these steps:
   
   1  Set up the workstation with the DOS ODI client driver.
   
   2  Load the ODI driver and log in to your NetWare server.
   
   3  Start Windows for Workgroups and set up the driver for the
      EtherExpress(TM) PRO/10 adapter by following the instructions shown
      in the Windows for Workgroups 3.11 installation document.  When the
      driver is chosen, Windows for Workgroups will detect that the ODI
      driver is already loaded and automatically install the appropriate
      support.



*  Third-party trademarks are the property of their respective owners