Server Driver for NetWare 4.11

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v4.11
   server driver for CNet PowerNIC 650Eplus PNP Ethernet Adapter.

   Location of Driver:     \NETWARE\SERVER\411\CN650EP.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process,  make sure that
      the Novell NetWare v4.11 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.
      1. Insert the CNet driver diskette into drive A and check the
         contents of subdirectory \NETWARE\SERVER\411, It should contain the
         following file :

         CN650EP.LANÄ  Novell NetWare V4.11 Server Driver
         CN650EP.LDIÄ  Novell NetWare V4.11 Server Driver Installation
                     Information File

      2. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server name: LOAD INSTALL <Enter>

      3. Select "Maintenance/Selective Install" and press <Enter>.

      4. Select  " LAN Driver Options (Configure/Load/...) "  and press
         <Enter>.

      5. Press the <Ins> key to specify other drivers to install.

      6. Press  <F3>  and specify the driver path (A:\NETWARE\SERVER\411)
         and press <Enter>.

      7. The CN650EP.LAN driver should appear in your choice list for the
         'Select a  LAN  Driver' field. Choose this  driver to start the
         driver loading and  binding  procedure.  This will allow you to
         load and bind all 4 frame types supported by NetWare.

      8. Add the LOAD and BIND statements you require to the server's
         AUTOEXEC.NCF file so that the LAN driver will load automatically
         each time the server starts up.

   Sample AUTOEXEC.NCF file
   ------------------------
      #Load the NLM files on Netware 4.1X server
      #-------------------------------------------
      load c:\nwserver\nbi
      load c:\nwserver\msm
      load c:\nwserver\ethertsm

      #Working with CN650EP driver (one CN650EP card)
      #---------------------------------------------------
      load c:\nwserver\CN650EP frame=ethernet_ii    name=e1
      load c:\nwserver\CN650EP frame=ethernet_802.2 name=e2
      load c:\nwserver\CN650EP frame=ethernet_802.3 name=e3
      bind ipx to e1 net=10
      bind ipx to e2 net=20
      bind ipx to e3 net=30


      Installation Notes:
      -------------------
      * Installing Multiple LAN Adapters:
         The keyword "EtherID" is the ethernet address of a adapter. This
         keyword is provided for multiple LAN adapters in a single server
         by the driver CN650EP.LAN.  So, add EtherID in LOAD commands. For
         example:

         LOAD CN650EP EtherID=0123456789AB FRAME=Ethernet_802.2 NAME=LAN_A
         BIND IPX TO LAN_A NET=11
         LOAD CN650EP EtherID=0123456789BC FRAME=Ethernet_802.2 NAME=LAN_B
         BIND IPX TO LAN_B NET=22