Windows 3.51 & 4.0

   Introduction:
   -------------
   This document describes the procedure to install  Windows NT3.51
   & NT4.0 driver for CNet PowerNIC 650Eplus PNP Ethernet Adapter.

   Location of Driver:     \WINNT\CN650EP.SYS

   Installing driver procedure on Microsoft Windows NT :
   -----------------------------------------------------
   When you are in Windows NT :
   1. In the Main group of NT, select the "Control Panel" icon.

   2. In the Control Panel window, choose the "Network" icon.

   3. In the Network Settings dialog box, choose the "Add Adapter" button.
      The Add Network Adapter dialog box appears.

   4. In the list of network cards, select "<other> Requires disk from
       manufacturer", and then press <Enter> button.

   5. Insert the CNet driver diskette in drive A, enter drive and pathname
       A:\ which is the path where the setup
       file OEMSETUP.INF are located, and then choose the OK button.

   6. The screen will appear "Input EthernetID" dialog box which is provide
      by CN650EP.SYS driver. This option is only required when you have more
      than one CNet PowerNIC 650Eplus PNP Ethernet Adapters on this computer.   Select
      SKIP if only one adapter is installed on this computer.

   7. NT will then perform the binding process.  If any additional network
      software options were installed,  you may be  prompted for  specific
      information for these packages.

   8. Restarting your system you will acquire network service.

   NOTES:
   ------
      *  Installing Multiple LAN Adapters:
         Enter Windows NT and follow above setup procedure step 2,in the
         "Network Settings" dialog box, choose the "Configure.." button.
         The "Input Ethernet ID"  dialog box appears and input adapter's
         Ethernet ID. Last step to select OK and close NETWORK SETUP.
         Select SKIP if only one adapter is installed on this computer.