LAN Server 4.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS LAN
   Requester  and OS/2 LAN server 4.0 for SureCom EP312 Plug&Play Ethernet
   Adapter.

   Location of Driver:  \NDIS\DOS\LAN_4\EP312.DOS  (for DOS  LAN Services)
                        \NDIS\OS2\EP312.OS2        (for OS/2 LAN Server  )


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------
      Before  you  start  with  the installation  process,  make sure that
      DOS LAN Services is  properly  installed.  Similarly , your  adapter
      should also be properly installed in your client PC.

      1. Copy EP312.DOS from  your Driver diskette  (A:\NDIS\DOS\LAN_4) to
         DOS LAN Services subdirectory C:\DLS .

      2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL

      3. The screen display some description.If it's correct,move highlight
         to "The listed options are correct" item ,then press <Enter>.

      4. Move highlight to "Network Card", then press <Enter>.

      5. Select "Change driver for network card." item, then press <Enter>

      6. Select "Network card not shown in list below..",then press <Enter>

      7. Insert the SureCom EP312 driver diskette in floppy A, and specify
         the pathname A:\NDIS\DOS\LAN_4,then press <Enter>.

      8. SureCom-EP312 driver  is now  installed on your computer , reboot
         your computer.

      NOTES:
      ------
          Parameters for the PROTOCOL.INI file:

            AdapterID : This keyword is provided by EP312, and is required
                        when  more  than  one  EP312 adapters exist on one
                        system.


   Installing driver procedure on OS/2 LAN Server 4.0:
   ---------------------------------------------------
      Before  you  start  with  the installation  process,  make sure that
      OS/2 LAN Server is properly installed.Similarly, your adapter should
      also be properly installed in your server.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the SureCom EP312 driver diskette, specify the driver path
         A:\NDIS\OS2 and press <Enter>.

      5. When complete above step to load EP312.OS2 into OS/2 system, then
         configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The  screen  will  display  "Configure"  dialog  box  and  select
         "LAN adapters and protocols" then press "configure" button.

      8. The  screen  will  display  "LAPS Configuration" dialog box, move
         highlight  to  "EP312 Plug and Play"  item  in  "Network Adapter"
         window, and select "NetBios" protocol. Press "OK".

      9. Installation  is  complete  now. Reset your PC by turning it  off
          and on.