LAN Server 2.0 or 3.0

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on DOS LAN
   Requester and OS/2 LAN server 2.0 (or 3.0)  for SureCom EP312 Plug&Play
   Ethernet Adapter.


   Location of Driver:  \NDIS\DOS\LAN_23\EP312.DOS (for DOS  LAN Services)
                        \NDIS\OS2\EP312.OS2        (for OS/2 LAN Server  )


   Installing driver procedure on DOS LAN Requester :
   --------------------------------------------------

      1. Insert  the IBM  LAN Support Program (LSP) Version 1.30 (or 1.31)
         Diskette into your floppy drive A: .

      2. Type A:\dxmaid  and press <Enter> .

      3. The  screen will display the  IBM logo. Press <Enter> twice until
         the "Environment Information" appears on screen.

      4. Responds to the screen  prompts , specifying the following values
         for each field,use the <Space Bar> to toggle between choices:

                Configuration for this computer?          Yes
                Use existing configuration information?   Yes
                Do you have adapter option diskettes?     Yes
                Are you configuring for two adapters?     No
                Do you need 802.2 interface support?      Yes

                Source for LSP                           A:\
                Target for new configuration             C:\lsp

         Make  sure  that the values given above are  correct , then press
         <Enter> to store your choices.

      5. Insert the SureCom EP312 driver diskette in floppy A, and specify
         your pathname A:\NDIS\DOS\LAN_23,then press ENTER.

      6. Follow  screen  instructions  to  complete  the  process.  Simply
         pressing  <Enter> for each screen display will select the default
         options.  Press <Enter> until you reach the display prompting you
         to insert the LSP diskette.

      7. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
         completion of the action.

      8.  A screen  showing  the  current  configuration  detected will be
          displayed. It should show the  SureCom  EP312   adapter and  the
          protocols already selected.
          (i.e., "IBM IEEE 802.2" and "IBM OS/2 NETBIOS").

      9.  Press <F4>. to save the new configuration.This completes the LSP
          installation.

      10. Save the configuration and reboot your computer.

      11. Insert the DOS LAN Requester Install Diskette 1 into your floppy
          drive.

      12. Type A:\INSTALL    <Enter>

      13. The  IBM logo will  again appear on the screen. Press <Enter> to
          move on to the next screen.

      14. Follow  screen  instructions ,  pressing  <Enter>  to move  from
          screen-to-screen until you are prompted to indicate the pathname
          of the DOS LAN Requester directory (C:\DOSLAN ).

      15. Specify the pathname (C:\DOSLAN is the default) for the  DOS LAN
          Requester directory . Then press <Enter> to continue.

      16. The program will ask you for the services that you require.

      17. Highlight the appropriate option. Select either "Send messages"
          or "Send, View, Edit, and Log message" option. (Normally, second
          option "Send, View, Edit and Log message" is selected).

      18. Specify the PC's ID and domain ID.

      19. Follow screen prompts to complete the installation.


   Installing driver procedure on OS/2 LAN Server 2.3 :
   --------------------------------------------------
      Before  you  start with the installation  process,  make  sure  that
      OS/2 LAN Server is properly installed.Similarly, your adapter should
      also be properly installed in your server.

      1. Copy  EP312.OS2  and EP312.NIF  files from  your Driver  diskette
         (\NDIS\OS2) to C:\IBMCOM\MACS.

      2. Click the OS/2 LAN Service icon.

      3. Select  "Installation  and  configuration".  The  IBM logo should
         appear onscreen.

      4. Click <OK>.

      5. Select <Advance> and press <Enter>.

      6. Select "Install or Configuration this Workstation."

      7. Select  server  type , adding a server or domain controller.  The
         "install or remove" selections should appear.

      8. Select "Configure a component."

      10. Click the "Configure" button.

      11. Select "Configure workstation."

      12. Select "SureCom  PnP adapter"  when  prompted  to  identify  you
          Network Adapter. Then click the <Add> button.

      13. Select IBM NETBIOS from the list and click the <Add> button.

      14. Select <OK> to confirm all selections.

      15. Follow  screen  instructions  to complete the process, selecting
          <OK> to accept default selections.

      16. Continue pressing <OK>  until your screen prompts  you to backup
          old CONFIG.SYS  and AUTOEXEC.BAT  and  create  a new  CONFIG.SYS
          and AUTOEXEC.BAT. Also select <OK> to confirm this.

      17. Installation  is  complete  now. Reset your PC by turning it off
          and on.

   Note :
   -----
      DOS version must be bellow DOS 5.0 when installing DOS LAN requester
      into your DOS system.