Installing Windows 95

  The AdvanceWare software is shipped on one or more diskettes depending on
  which kit is purchased. Use the appropriate diskette that contains Windows 95.
  The following checklist covers both when an AdvanSCSI PCI adapter is added to a
  functional Windows 95 system, and when Windows 95 is installed for the first
  time.

  When an AdvanSCSI PCI adapter is added to an installed and running Windows 95
  system, Windows 95 will detect the presence of the adapter card upon the first
  boot after the card's installation. Windows 95 will display the dialog, New
  Hardware Found.

  When Windows 95 is installed for the first time on a system that contains an
  AdvanSCSI PCI adapter card, this dialog is not displayed. The following
  checklist covers both possibilities.

Step by step installation checklist:

 1)  If the dialog, New Hardware Found, is NOT displayed, skip to step 6.
 2)  Click on Driver from disk provided by the hardware manufacturer.
 3)  Click on OK.
 4)  Insert the AdvanSCSI Universal Drivers Diskette in drive A, type A:\WIN95
	 then click OK. Windows will copy the AdvanSCSI Universal Windows 95
	 driver.
 5)  Skip to step 16.
	 If the New Hardware Found dialog is NOT displayed:
 6)  Go to the Device Manager by clicking
	 My Computer/Control Panel/System/Device Manager.
 7)  Double Click on Other devices.
 8)  Click on PCI SCSI Bus Controller, then select Properties.
 9)  Click the Driver tab at the top.
 10) Click on Update Driver.
 11)	 Select SCSI Controllers from near the bottom of the list, Click on OK.
 12)	 Click on Have Disk.

 13) Insert the AdvanSCSI Universal Drivers Diskette into drive A, type A:\
	 WIN95 then click OK.
 14) Select AdvanSCSI PCI SCSI Host Adapter Driver and Click on OK.
 15) Click on OK, Windows will copy the AdvanSCSI Universal Windows 95
	 driver.
 16) Click on Yes to restart the computer.
 17) Go to the Device Manager by clicking
	 My Computer/Control Panel/System/Device Manager.
 18) Click the AdvanSCSI PCI SCSI Host Adapter Driver icon, then select
	 Properties.
 19) Verify that the dialogue, This device is working properly is displayed
	 in the Device status box.

 Installation of the AdvanSCSI Universal Windows 95 driver is now complete.