SEAGATE TECHNOLOGY, INC.

MAYNSTREAM 4000 INTERNAL

Device Type             Internal Tape Drive
Interface               SCSI-2
Format                  DDS-DC
Sustained Transfer Rate 366 KBPS
Size                    5.25 in. half height
View                    Top


                        USER CONFIGURABLE SETTINGS

              Setting                   Label             Position

  »   SCSI 2 mode enabled               SW1/4                On

      SCSI 1 mode enabled               SW1/4                Off

  »   Parity check disabled             SW1/5                Off

      Parity check enabled              SW1/5                On

  »   DDS pass through mode             SW1/6                Off
      disabled

      DDS pass through mode             SW1/6                On
      enabled

  »   Factory configured - do not       SW1/7             Reserved
      alter

  »   Self-Test disabled                SW1/8                Off

      Self-Test enabled                 SW1/8                On

                          SCSI ADDRESS SELECTION

      Address             SW1/1             SW1/2              SW1/3

  »         0              Off               Off                Off

            1               On               Off                Off

            2              Off                On                Off

            3               On                On                Off

            4              Off               Off                On

            5               On               Off                On

            6              Off                On                On

            7               On                On                On

                       REMOTE SCSI ADDRESS SELECTION

      Address             JP1/1             JP1/2              JP1/3

  »         0              Off               Off                Off

            1               On               Off                Off

            2              Off                On                Off

            3               On                On                Off

            4              Off               Off                On

            5               On               Off                On

            6              Off                On                On

            7               On                On                On

  Note: To use the remote SCSI address port, set SW1/1, SW1/2, and SW1/3
  to the Off position.

                        TERMINATION POWER SELECTION

                 Setting                                JP2

  »   TERMPWR disabled                                  Open

      TERMPWR enabled                                  Closed

                  MANUFACTURERS RECOMMENDED MEDIA

              Tape                           Capacity

  90-meter DDS-DC DAT cartridge                2.0GB