SEAGATE TECHNOLOGY, INC. PEREGRINE 4586NP Device Type Internal Tape Drive Interface SCSI-2 Format DDS-2, DDS-DC Sustained Transfer Rate 400 KBPS (compressed 800 KBPS) Size 5.25 in. half height View Top USER CONFIGURABLE SETTINGS Setting Label Position » Termination disabled JP2 Open Termination enabled JP2 Closed » All mode enabled SW1/4 On MRS mode enabled SW1/4 Off » Parity check disabled SW1/5 Off Parity check enabled SW1/5 On » DDS-DC pass through mode SW1/6 Off enabled DDS pass through mode enabled SW1/6 On » Factory configured - do not SW1/7 Reserved alter » Self test disabled SW1/8 Off Self test enabled SW1/8 On » Drive mounted horizontaly SW2/1 Off Drive mounted verticaly SW2/1 On » Automatic insertion of first SW2/2 On cartridge enabled Automatic insertion of first SW2/2 Off cartridge disabled » Factory configured - do not SW2/3 Reserved alter » Factory configured - do not SW2/4 Reserved alter » Continuous cycle disabled SW3/3 Off Continuous cycle enabled SW3/3 On » Display intensity light SW3/4 On Display intensity normal SW3/4 Off » Self-test sequence disabled SW3/5 Off Self-test sequence enabled SW3/5 On » Factory configured - do not SW3/6 Reserved alter » Factory configured - do not SW3/7 Reserved alter EXTERNAL SCSI ID SELECTION SCSI ID JP1/1 JP1/2 JP1/3 » 0 Off Off Off 1 Off Off On 2 Off On Off 3 Off On On 4 On Off Off 5 On Off On 6 On On Off 7 On On On Note: If SCSI ID is set using SW1/1 - SW1/3, then the external SCSI ID (JP1) must be set to 0. SCSI ID SELECTION SCSI ID SW1/1 SW1/2 SW1/3 » 0 Off Off Off 1 Off Off On 2 Off On Off 3 Off On On 4 On Off Off 5 On Off On 6 On On Off 7 On On On Note: If SCSI ID is set using SW1/1 - SW1/3, then the external SCSI ID (JP1) must be set to 0. LANGUAGE SELECTION Language SW3/1 SW3/2 » English On Off French Off On German Off Off Spanish On On MANUFACTURERS RECOMMENDED MEDIA Tape Capacity Without Capacity With Compression Compression 90 meter DDS-2 DAT 24 GB 48 GB cartridge 120 meter DDS-2 DAT 48 GB 96 GB cartridge