SIEMENS NIXDORF H343 Device Type Internal Tape Drive Interface SCSI-2 Format DDS, DDS-2, DDS-3, DDS-DC Sustained Transfer Rate 1 MBPS (native), 2 MBPS (compressed) Size 5.25 in. full height View Bottom USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter SW1/1 On » Factory configured - do not alter SW1/2 On » Factory configured - do not alter SW1/3 On » Factory configured - do not alter SW1/4 Off » Media Recognition System enabled SW2/3 Off Media Recognition System disabled SW2/3 On » Factory configured - do not alter SW2/4 On » Factory configured - do not alter SW2/5 On » Factory configured - do not alter SW2/6 On » Factory configured - do not alter SW2/7 On » Factory configured - do not alter SW2/8 On » Factory configured - do not alter JP1/9 Unidentified DRIVE SELECT ID Drive ID JP1/Pins 3 & 4 JP1/Pins 5 & 6 JP1/Pins 7 & 8 0 Open Open Open 1 Open Open Closed 2 Open Closed Open 3 Open Closed Closed 4 Closed Open Open 5 Closed Open Closed 6 Closed Closed Open 7 Closed Closed Closed COMPRESSION SETTINGS Function SW2/1 SW2/2 » Compression with software control enabled On On Compression without software control enabled On Off Compression with software control disabled Off On Compression without software control enabled Off Off TERMINATION POWER SELECTION Setting JP1/Pins 1 & 2 TERMPWR supplied by drive Closed TERMPWR supplied by SCSI interface Open to drive MANUFACTURERS RECOMMENDED MEDIA Tape Capacity Without Capacity With Compression Compression 60m DDS 1.3GB 2.6GB 90m DDS 2GB 4GB 120m DDS-2 4GB 8GB 125m DDS-3 12GB 24GB DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On A tape magazine is loaded in the drive LED1 Green Blinking A tape magazine is being loaded in the drive LED1 Green Off A tape magazine is not loaded in drive LED2 Green On A cartridge is loaded in the drive LED2 Green Blinking The drive is reading/writing or is fast in a power diagnostic mode LED2 Green Blinking A cartridge is being loaded in slow drive LED2 Green Off No tape activity LED3 Amber On A fatal hardware error has occurred LED3 Amber Blinking A non-fatal error has occurred LED3 Amber Off Drive operation is good