SIEMENS NIXDORF H331 Device Type Internal Tape Drive Interface SCSI-2 Format DAT, DDS, DDS-2, DDS-3, DDS-DC, DCLZ Sustained Transfer Rate 1 MBPS (native), 2 MBPS (compressed) Size 5.25 in. half height View Top USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter JP1 Unidentified » Media Recognition System disabled SW1/3 On Media Recognition System enabled SW1/3 Off » Factory configured - do not alter SW1/4 On » Factory configured - do not alter SW1/5 On » Factory configured - do not alter SW1/6 On » Factory configured - do not alter SW1/7 On » Factory configured - do not alter SW1/8 On DRIVE SELECT ID Drive ID JP2 JP3 JP4 0 Open Open Open 1 Closed Open Open 2 Open Closed Open » 3 Closed Closed Open 4 Open Open Closed 5 Closed Open Closed 6 Open Closed Closed 7 Closed Closed Closed COMPRESSION SETTINGS Function SW1/1 SW1/2 » Compression with software control enabled On On Compression without software control enabled On Off Compression with software control disabled Off On Compression without software control enabled Off Off TERMINATION POWER SELECTION Setting JP5 » TERMPWR supplied by SCSI interface Open to drive TERMPWR supplied by drive Closed MANUFACTURERS RECOMMENDED MEDIA Tape Capacity Without Capacity With Compression Compression 60m DDS 1.3GB 2.6GB 90m DDS 2GB 4GB 120m DDS-2 4GB 8GB 125m DDS-3 12GB 24GB DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On Cartridge present, drive active LED1 Green Slow Blinking Cartridge loading or unloading LED1 Green Fast Blinking Cartridge is being read or written to LED1 Green Off No power/drive Idle, no cartridge LED2 Yellow On Drive fault detected LED2 Yellow Blinking Drive cleaning required LED2 Yellow Off No drive fault detected