COMPAQ COMPUTER CORPORATION 12/24 GB DAT 6 CASSETTE AUTOLOADER Device Type Internal Tape Drive Interface SCSI-2 Fast Format DAT, DDS-3 Sustained Transfer Rate 1 MBPS (native), 2 MBPS (compressed) Size 5.25 in. full height View Top USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not alter JP1/Pin 9 Unidentified » Media Recognition System disabled SW2/3 On Media Recognition System enabled SW2/3 Off » Factory configured - do not alter SW2/4 On » Factory configured - do not alter SW2/5 On » Factory configured - do not alter SW2/6 On » Factory configured - do not alter SW2/7 On » Factory configured - do not alter SW2/8 On DRIVE SELECT ID Drive ID JP1/Pins 3 & 4 JP1/Pins 5 & 6 JP1/Pins 7 & 8 0 Open Open Open 1 Open Open Closed 2 Open Closed Open 3 Open Closed Closed 4 Closed Open Open 5 Closed Open Closed 6 Closed Closed Open 7 Closed Closed Closed OPTION SWITCH SETTINGS Setting SW1/1 SW1/2 SW1/3 SW1/4 » Re-sequencing and LUN 1 On On On Off Magazine Ready enabled Re-sequencing, LUN 0 Drive Off On On Off Inquiry, and LUN 1 Magazine Ready enabled Auto-stack and auto-eject On Off Off Off enabled All options disabled On On On On DATA COMPRESSION SETTINGS Setting SW2/1 SW2/2 » Enable compression at power-up with SCSI interface On On Enable compression at power-up without SCSI interface On Off Disable compression at power-up with SCSI interface Off On Disable compression at power-up without SCSI interface Off Off TERMINATION POWER SELECTION Setting JP1/Pins 1 & 2 » TERMPWR supplied by drive Closed TERMPWR supplied by SCSI interface Open to drive MANUFACTURERS RECOMMENDED MEDIA Tape Sony 60m (DG-60M) Fuji 90m (DG-90M) Fuji 120m (DG-120M) Sony 125m (DGD-125m) Fuji 125m (DG3-125m) Maxell 125m (HS 4/125s) DIAGNOSTIC LED(S) LED Color Status Condition LED1 Green On A tape magazine is loaded in the drive LED1 Green Blinking A tape magazine is being loaded in the drive LED1 Green Off A tape magazine is not loaded in drive LED2 Green On A cartridge is loaded in the drive LED2 Green Blinking The drive is reading/writing or is fast in a power diagnostic mode LED2 Green Blinking A cartridge is being loaded in slow drive LED2 Green Off No tape activity LED3 Amber On A fatal hardware error has occurred LED3 Amber Blinking A non-fatal error has occurred LED3 Amber Off Drive operation is good