SEAGATE TECHNOLOGY, INC.

SIDEWINDER 50 INTERNAL

Device Type             Internal Tape Drive
Interface               SCSI-2 Fast/Wide
Format                  AIT-1
Sustained Transfer Rate 3MBPS (Native), 6 to 9MBPS (Compressed)
Size                    3.5 in. half height
View                    Bottom


                        USER CONFIGURABLE SETTINGS

                  Setting                     Label         Position

  »   Parity check enabled                    JP1/1           Open

      Parity check disabled                   JP1/1          Closed

  »   Factory configured - do not alter       JP1/2       Unidentified

  »   Factory configured - do not alter       SW1/1       Unidentified

  »   Factory configured - do not alter       SW1/2       Unidentified

  »   Factory configured - do not alter       SW1/3       Unidentified

  »   Factory configured - do not alter       SW1/4       Unidentified

  »   Termination enabled                     SW1/6            On

      Termination disabled                    SW1/6           Off

  »   Data compression enabled                SW1/7            On

      Data compression disabled               SW1/7           Off

  »   Factory configured - do not alter       SW1/8            On

                              DRIVE SELECT ID

    Drive ID        JP1/3          JP1/4          JP1/5          JP1/6

  »      0           Open           Open           Open           Open

         1           Open           Open           Open          Closed

         2           Open           Open          Closed          Open

         3           Open           Open          Closed         Closed

         4           Open          Closed          Open           Open

         5           Open          Closed          Open          Closed

         6           Open          Closed         Closed          Open

         7           Open          Closed         Closed         Closed

         8          Closed          Open           Open           Open

         9          Closed          Open           Open          Closed

         10         Closed          Open          Closed          Open

         11         Closed          Open          Closed         Closed

         12         Closed         Closed          Open           Open

         13         Closed         Closed          Open          Closed

         14         Closed         Closed         Closed          Open

         15         Closed         Closed         Closed         Closed

                        TERMINATION POWER SELECTION

                       Setting                               SW1/5

  »   TERMPWR supplied by drive                                On

      TERMPWR supplied by SCSI interface to drive             Off

                      MANUFACTURERS RECOMMENDED MEDIA

        Tape             Capacity Without       Capacity With Compression
                           Compression

       AIT-1                   25GB                    50GB to 75GB


                             DIAGNOSTIC LED(S)

      LED1             LED2             LED3              Condition

       Off              Off              Off           No drive or SCSI
                                                          activity

       On               Off              Off         SCSI activity only

   Quick flash      Quick flash          Off          Write-enabled tape
                                                       being loaded or
                                                          unloaded

   Quick flash      Quick flash          On          Write-protected tape
                                                       being loaded or
                                                          unloaded

       Off              On           Quick flash        Cleaning tape

       Off              On               Off           Tape loaded - No
                                                        drive or SCSI
                                                          activity

       On               On               Off            Tape loaded -
                                                     Activity on SCSI bus
                                                            only

   Quick flash          On               Off          Tape loaded - SCSI
                                                     and drive activity

    Variable            On               On          Write-protected tape
                                                     loading into drive

    Variable         Blinking         Variable       Media error (loaded
                                                       tape has excess
                                                           errors)

  Unidentified     Unidentified       Blinking         Tape heads need
                                                          cleaning

  Unidentified     Unidentified     Double flash      Self-test failure

   Slow flash      Unidentified     Unidentified      Hardware failure -
                                                      Waiting for reset

  Unidentified      Slow flash      Unidentified      Hardware failure -
                                                      Waiting for eject

  Note: The color of the LED's are unidentified.