SANKYO CP 1000SE Device Type Tape Drive Interface SCSI-2 Format QIC-24 (read) QIC-120, QIC-150, QIC-525, QIC-1000 (read/write) Sustained Transfer Rate 113/240KBPS Size 5.25 in. half height View Bottom CONNECTIONS Function Label Ground connector CN1 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not J1 Unidentified alter. » Factory configured - do not J4 Unidentified alter. » Factory configured - do not J5 Unidentified alter. » Factory configured - do not JPS Unidentified alter. » Parity enabled (odd) JP1/Pins 7 & Open 8 Parity disabled JP1/Pins 7 & Closed 8 DRIVE SELECT ID Drive ID JP1/Pins 1 & 2 JP1/Pins 3 & 4 JP1/Pins 5 & 6 » 0 Closed Closed Closed 1 Open Closed Closed 2 Closed Open Closed 3 Open Open Closed 4 Closed Closed Open 5 Open Closed Open 6 Closed Open Open 7 Open Open Open TERMINATION POWER SELECTION Note: External termination via pin 26 of interface. MANUFACTURERS RECOMMENED MEDIA Tape Capacity Without Capacity With Compression Compression QIC-24 450/600ft. 45/60MB Unidentified QIC-120 600ft. 125MB Unidentified QIC-150 600/1,000ft. 150/250MB Unidentified QIC-1000 760ft. 1.0GB Unidentified DIAGNOSTIC LED(S) LED Color Status Condition LED1 N/A Off Power off LED1 N/A Off Power on, no media present LED1 Green On Drive ready LED1 Green Blinking Drive busy LED1 Amber On Media removal prevented, ready LED1 Amber Blinking Media removal prevented, busy Note: Function of LED101 is unidentified.