ADVANCED DIGITAL INFORMATION CORPORATION

DATA 8008E SERIES

Device Type             Tape Drive
Interface               SCSI-2
Format                  DDS-2
Sustained Transfer Rate Unidentified
Size                    4.56 in. (w) x 3.94 in. (h)
View                    Top


                              DRIVE SELECT ID

  Note: SCSI ID is selected by activating SW1 until the desired number is
  displayed in the viewing window. Press the (+) button to select a
  higher ID, press the (-) button to select a lower ID.

                       MANUFACTURERS RECOMMEND MEDIA

         Tape              Capacity Without            Capacity With
                             Compression                Compression

  90 meter cartridge            2.0 GB                 Unidentified

  120 meter cartridge        Unidentified                 8.0 GB


                             DIAGNOSTIC LED(S)

    LED1        LED2        LED3                   Condition

    Off         Off          Off          Tape not loaded/No activity

     On         Off          Off             Read or write to tape

  Flash 1     Flash 1        Off               Loading/Unloading

  Flash 1     Flash 1        On        Loading/Unloading write protected

    Off          On        Flash 1     Cleaning cartridge at end of media
                                        (no cleaning cycles remaining)

    Off          On          Off              Loaded/No activity

     On          On          Off             Loaded/SCSI activity

  Flash 1        On          Off         Loaded/SCSI - drive activity

    N/A          On          On             Loaded/Write protected

    N/A       Flash 3        N/A           Media Caution Signal (1) -
                                           excessive errors detected

  Flash 3       N/A          N/A            High humidity detected

    N/A         N/A        Flash 3      Media Caution Signal (2) - tape
                                           head motion hours reached

    N/A         N/A        Flash 2       Drive mechanical failure/Drive
                                               circuitry failure

  Flash 2       N/A          N/A               Waiting for reset

    N/A       Flash 2        N/A               Waiting for eject

  Note: Flash 1 = .25 seconds On, .25 seconds Off; Flash 2 = .25 seconds
  On, 1 second Off; Flash 3 = 3.5 seconds On, .25 seconds Off.