SANKYO CP 525SE Device Type Tape Drive Interface SCSI Format QIC-11(read only), QIC-24 (read only), QIC-120, QIC-150, QIC-525 Sustained Transfer Rate 240KBPS Size 5.25 in. half height View Bottom CONNECTIONS Function Label Ground connector CN1 USER CONFIGURABLE SETTINGS Setting Label Position » Factory configured - do not BR1 Unidentified alter. » Factory configured - do not BR2 Unidentified alter. » Factory configured - do not J1 Unidentified alter. » Factory configured - do not J4 Unidentified alter. » Factory configured - do not J5 Unidentified alter. » Factory configured - do not J10 Unidentified alter. » Factory configured - do not JPS Unidentified alter. » Factory configured - do not SB1 Unidentified alter. » Parity enabled (odd) JP1/Pins 7 & Open 8 Parity disabled JP1/Pins 7 & Closed 8 DRIVE SELECT ID Drive ID JP1/Pins 1 & 2 JP1/Pins 3 & 4 JP1/Pins 5 & 6 » 0 Closed Closed Closed 1 Open Closed Closed 2 Closed Open Closed 3 Open Open Closed 4 Closed Closed Open 5 Open Closed Open 6 Closed Open Open 7 Open Open Open TERMINATION POWER SELECTION Note: External termination via pin 26 of interface. MANUFACTURERS RECOMMENED MEDIA Tape Capacity Without Compression QIC-11 450ft. 45MB QIC-24 450/600ft. 45/60MB QIC-120 600ft. 125MB QIC-150 600/1,000ft. 150/250MB QIC-525 1,000ft. 320/525MB