PINNACLE MICRO, INC.

RCD 5040 (EXTERNAL)

Device Type       Recordable CD
Interface         SCSI-1
Spin Rate - Read  4x
Spin Rate - Write 2x
Formats Supported Unidentified
View              Top


                                CONNECTIONS

        Function            Label           Function            Label

  Audio out - right          CN1       Chassis ground            CN3
  channel

  Audio out - left           CN2
  channel

                    DIAGNOSTIC LED(S) - NOT DIAGRAMMED

      LED           Color           Status              Condition

  Speed - front     Green             On           4x and 2x spin rate
     panel

  Speed - front     Yellow            On               1x spin rate
     panel

  Speed - front      N/A             Off             No disc inserted
     panel

  Busy - front      Green             On          Reading data from disc
     panel

  Busy - front      Yellow            On         Writing data or audio to
     panel                                                 disc

  Busy - front      Yellow         Blinking           Playing audio
     panel

  Busy - front       N/A             Off         Idle or no disc inserted
     panel

                       MISCELLANEOUS TECHNICAL NOTES

  SCSI ID selection:

  SW1 is for SCSI ID selection, 0 through 7. Default setting is 2. To
  select SCSI ID, turn off the power, press the top button to increase
  value and the bottom button to decrease value. The new SCSI ID will be
  registered when the power is turned on then off again.

  Termination:

  When terminating the drive, make sure the power is turned off, then
  plug a passive SCSI-1 terminator block to one of the SCSI-1 ports on
  the back panel.

  Host adapter for the RCD 5040 in a PC system is Adaptec AHA-1535.