DIALOGIC CORPORATION

D/41ESC

Card Type                 Voice processor card
Chip Set                  Intel
Maximum Onboard Memory    Unidentified
I/O Options               RJ-11 jacks (4), 20-pin AEB connector, 26-pin PEB
                          connector
Data Bus                  16-bit ISA
Card Size                 Full-length, full-height

<P/

[Image]

                                               CONNECTIONS

               Function                  Label                  Function                      Label

 Channel 1 via RJ-11                      J1      Channel 4 via RJ-11                          J4

 Channel 2 via RJ-11                      J2      20-pin AEB connector                         P3

 Channel 3 via RJ-11                      J3      26-pin PEB connector                         P5

                                     USER CONFIGURABLE SETTINGS

                               Function                                 Label        Position

 Board ID selection                                                      SW1         See note

 » Hook switch set for on hook operation                                SW2/1           Off

 Hook switch set to off hook operation                                  SW2/1           On

 » Board ID range set to 0 - 15                                         SW2/2           Off

 Board ID range set to 16 - 31                                          SW2/2           On

 Note: SW1 is a rotary switch used to determine the Board ID settings. The default Board ID
 setting is 0.

 SW1 is used in concurrence with SW2/2.