DIALOGIC CORPORATION

VFX/PCI

Card Type               Voice processor card
Chip Set                Motorola
Maximum Onboard Memory  Unidentified
I/O Options             RJ-11 jacks (4), CTbus interface, 52-pin
                        connector,

                        20-pin connectors (2)
Data Bus                32-bit PCI
Card Size               Full-length, full-height



[Image]

                                               CONNECTIONS

                Function                  Label                  Function                     Label

 CTbus interface                           CN1     Channel 4 via RJ-11                         J4

 Channel 1 via RJ-11                       J1      52-pin fax daughter card connector          J5

 Channel 2 via RJ-11                       J2      20-pin fax daughter card connector          J6

 Channel 3 via RJ-11                       J3      20-pin fax daughter card connector          J7

                                     USER CONFIGURABLE SETTINGS

                               Function                                 Label        Position

 Board ID selection                                                      SW1         See note

 » Hook switch set for on hook operation                                SW2/1           Off

 Hook switch set to off hook operation                                  SW2/1           On

 » Board ID range set to 0 - 15                                         SW2/2           Off

 Board ID range set to 16 - 31                                          SW2/2           On

 Note: SW1 is a rotary switch used to determine the Board ID settings. The default Board ID
 setting is 0.

 SW1 is used in concurrence with SW2/2.

                                           BOARD TERMINATION SETTINGS

               Setting                        JP2                JP3               JP4               JP5

 » Termination disabled                      Open               Open              Open               Open

 Termination enabled                        Closed             Closed            Closed             Closed

                                      CTBUS CLOCK SIGNAL SETTINGS

             Setting                            JP6                               JP7

              SCbus                      Pins 1 & 2 closed                 Pins 1 & 2 closed

               MVIP                      Pins 2 & 3 closed                 Pins 2 & 3 closed

                               DIAGNOSTIC LED

     LED         Color         Status                Condition

     CR5      Unidentified       On         The card is receiving power

     CR5      Unidentified      Off       The card is not receiving power