ASCEND COMMUNICATIONS, INC. PIPELINE 400 T1 Card Type T1 Remote Access Server Chip Set Unidentified I/O Options Power connector, 10BaseT Hut via RJ-45 connectors (12), 15-pin AUI port, BNC connector, UTP interface via RJ-45 connector T1/PRI interface via RJ-45 connectors (2), 9-pin serial port Wiring Type Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial Ethernet Transfer Rate 10Mbps T1 Transfer Rate Unidentified ISDN Rate Unidentified ISDN Modulation Protocol PPP, SLIP, X25, MLPPP Error Correction/Compression Unidentified Data Bus External [Image] CONNECTIONS Function Label Function Label Power CN1 10BaseT Hut (optional) CN5-CN16 9-pin serial port CN2 15-pin AUI port CN17 T1/PRI interface CN3 BNC connector CN18 (RJ-45) T1/PRI interface CN4 UTP interface (RJ-45) CN19 (RJ-45) DIAGNOSTIC LED(S) LED Color Status Condition PWR Unidentified On Power is on PWR Unidentified Off Power is off ACT Unidentified Blinking Data is being transmitted/received on Ethernet interface ACT Unidentified Off Data is not being transmitted/received on Ethernet interface COL Unidentified Blinking Collisions are being detected on Ethernet interface COL Unidentified Off Collisions are not being detected on Ethernet interface WAN Unidentified On WAN session is active WAN Unidentified Blinking Error detected on BRI interface WAN Unidentified Off Connection is broken on BRI interface CON Unidentified On Unit is connected to power source; power-up test in progress CON Unidentified Off Unit is not connected to power source; power-up test not in progress