NATIONAL INSTRUMENTS PC-DIO-24 Card Type Digital I/O card Chip Set OKI I/O Options 50-pin interface Data Bus 16-bit ISA Card Size Half-length, full-height [Image] CONNECTIONS Function Label 50-pin interface J1 BASE I/O ADDRESS SELECTION Setting U2/1 U2/2 U2/3 U2/4 U2/5 U2/6 U2/7 U2/8 100h Off On On On On On On On 200h On Off On On On On On On »210h Off On On On On Off On On 300h Off Off On On On On On On 400h On On Off On On On On On EF00h Off Off Off Off On Off Off Off FB00h Off Off On Off Off Off Off Off FD00h Off On Off Off Off Off Off Off FE00h On Off Off Off Off Off Off Off FF00h Off Off Off Off Off Off Off Off Note: A total of 255 base address settings are available. The switches are a binary representation of the decimal memory addresses. U2/8 is the Most Significant Bit and switch U2/1 is the Least Significant Bit. The switches have the following decimal values: U2/8=32768, U2/7=16384, U2/6=8192, U2/5=4096, U2/4=2048, U2/3=1024, U2/2=512, U2/1=256. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0) INTERRUPT ENABLE LINE SELECTION Line W1/A W1/B W1/C W1/D PC2 Open Open Closed Open »PC4 Open Closed Open Open PC6 Closed Open Open Open N/C (disabled) Open Open Open Closed PARALLEL PORT INTERRUPT SELECTION IRQ W2/A W2/B W2/C W2/D W2/E W2/F 3 Closed Open Open Open Open Open 4 Open Closed Open Open Open Open »5 Open Open Closed Open Open Open 6 Open Open Open Closed Open Open 7 Open Open Open Open Closed Open 9 Open Open Open Open Open Closed