PATTON ELECTRONICS, INC. 2026P Card Type Interface Converter Chip Set Patton I/O Options 25-pin serial port, 36-pin parallel port, power Maximum Data Rate 38.4Kbps Data Bus External [Image] CONNECTIONS Function Label Function Label 36-pin parallel port CN1 Power CN3 25-pin DTE/DCE serial CN2 port USER CONFIGURABLE SETTINGS Setting Label Position » Hardware flow control enabled SW1/1 Off Software flow control enabled SW1/1 On Parallel BERT output message SW1/1 Off Serial BERT output message SW1/1 On » Bit error rate test (BERT) disabled SW1/2 Off Bit error rate test (BERT) enabled SW1/2 On Note: Setting SW1/2 to the on position, activates the BERT error test and enables the secondary usage of switch SW1/1 DATA FORMAT Data Parity Stop SW1/3 SW1/4 SW1/5 Bits » 8bits No parity 1 stop Off Off Off bit 8bits Odd parity 1 stop On Off Off bit 8bits Even 1 stop Off On Off parity bit 7bits Odd parity 2 stop On On Off bits 7bits Even 2 stop Off Off On parity bits 7bits No parity 2 stop On Off On bits 7bits Odd parity 1 stop Off On On bit 7bits Even 1 stop On On On parity bit DATA RATE Setting SW1/6 SW1/7 SW1/8 300bps Off Off On 600bps On Off On 1200bps On On Off 2400bps Off On On 4800bps On On On » 9600bps Off Off Off 19.2Kbps On Off Off 38.4Kbps Off On Off