MOXA TECHNOLOGIES CO., LTD

C104A, C104H, C104HS, C104P, C104S

C168H, C168HS, C168P

Card Type         Serial controller
Chip Set          Unidentified
I/O Options       Serial ports (4 RS-232) – C104

                  Serial ports (8 RS-232/RS422) – C168
Data Bus          16-bit ISA (EISA compatible)
Card Size         Full-height, Half-length card

[Image]

                           CONNECTIONS

            Function                          Label

  4 or 8 Serial Ports via DB-37                CN1

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   CAP address 0x180 enabled                  JP1           Open

      CAP address 0x180 disabled                 JP1          Closed

  Note: When disabled CAP address is forced to 0xA700

                       MISCELLANEOUS TECHNICAL NOTES

  Note: Base I/O address and IRQ settings are configured via software
  written to EEPROM. Normally the default settings should be used unless
  another device cannot be configured to an address other than 0x180. If
  JP1 is shorted this will force the Configuration Access Port (CAP) to
  address 0xA700.