DIGICOM SYSTEMS

SCOUT PLUS (INTERNAL)

Card Type                    Modem, Fax
Chip Set                     Unidentified
I/O Options                  Line in (RJ-11), line out (RJ11)
Maximum Modem Rate           14.4Kbps
Maximum Fax Rate             9600bps
Data Modulation Protocol     Bell 212A, ITU-T V.22, V.22bis, V.32, V.32bis
Fax Modulation Protocol      V.27ter, V.29
Error Correction/Compression MNP5, V.42, V42bis
Fax Class                    Class I & II
Data Bus                     8-bit ISA

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  RJ-11 line                      CN1       RJ-11 line              CN2

                        USER CONFIGURABLE SETTINGS

                    Function                      Label      Position

  Normal operation enabled                        SW1/1         On

  Modem reset                                     SW1/1         Off

  Factory configured - do not alter               SW1/2         Off

            SERIAL PORT ADDRESS

    Setting        SW1/3          SW1/4

  COM1 (3F8h)       Off            Off

  COM2 (2F8h)        On            Off

  COM3 (3E8h)       Off            On

  COM4 (2E8h)        On            On

                         SUPPORTED COMMAND SET

                           Basic AT Commands

  AT, A/, +++

  A, E, H, M, 0, V, Z

  &F, &T, &Z



                              S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26



  Note: See MHI Help file for full command documentation.

                         PROPRIETARY AT COMMAND SET

   For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS (EXTERNAL)