UNIDENTIFIED

SERIAL/PARALLEL ADAPTER

Card Type      Serial/Parallel Adapter
I/O Options    Parallel port, serial ports (2)
Data Bus       8-bit ISA

[Image]

                                CONNECTIONS

        Function            Label            Function             Label

  26-pin serial port         J1       25-pin parallel port         J3

  9-pin serial port          J2

  Note: For J1, one 26 pin-to-25 pin female D connector adapter cable is
  needed to provide a standard RS-232 connection point

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

      COM1 enabled                           SW1/1            On

      COM1 disabled                          SW1/1            Off

      PRT1 enabled                           SW1/2            On

      PRT2 disabled                          SW1/2            Off

      COM2 enabled                           SW1/3            On

      COM2 disabled                          SW1/3            Off

  »   Factory configured - do not alter      SW1/4       Unidentified

      PARALLEL PORT ADDRESS SELECTION

    Setting                 JP1

  LPT1 (378h)    Pins 1 & 2, 5 & 6 closed

  LPT2 (278h)    Pins 1 & 2, 4 & 5 closed