SEALEVEL SYSTEMS, INC. SIO-II Card Type Serial card Chip Set Unidentified Maximum Onboard Memory Unidentified I/O Options Serial port Hard Drives supported None Floppy drives supported None Data Bus 8-bit ISA Card Size Half-length, full-height [Image] CONNECTIONS Function Label Serial Port 1 CN1 USER CONFIGURABLE SETTINGS Function Label Position RS-485 enabled by RTS E2 Closed RS-485 always enabled E2 Open RS-232 with U7 & U11 installed E5 Pins 2 & 3 closed » RS-422/485 with U6 & U7 installed E5 Pins 2 & 3 closed Current Loop with U6 & U7 installed E5 Pins 1 & 2 closed Note: For the RS-422, the RS-485, and the Current loop, the RS-422/485 driver/receiver pair are installed at U6 and U7. For the RS-232, U6 and U7 must be removed and the RS-232 driver/receiver pair are installed at locations U17 and U11. BASE I/O ADDRESS SELECTION PORT 1 Setting SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 238h On Off Off Off Off Off Off Off 2B8h Off On Off Off Off Off Off Off 338h Off Off On Off Off Off Off Off 3B8h Off Off Off On Off Off Off Off 278h Off Off Off Off On Off Off Off 2F8h Off Off Off Off Off On Off Off 378h Off Off Off Off Off Off On Off » 3F8h Off Off Off Off Off Off Off On Disabled Off Off Off Off Off Off Off Off SERIAL PORT 1 INTERRUPT SELECTION IRQ E1/Pins 1 & 2 E1/Pins 2 & 3 E9 IRQ3 Closed Closed Open » IRQ4 Open Closed Open IRQ5 Open Open Closed None Open Open Open