UNIDENTIFIED

SUPER COMBO VGA GRAPHICS ADAPTER

Card Type                   Multi I/O card
Video Chip Set              Trident
Maximum Video Memory        1MB DRAM
Video Types Supported       Monochrome, CGA, EGA, VGA
Highest Resolution          1024 x 768
Supported
I/O Options                 15-pin analog video port, serial ports (2),
                            parallel ports (2), floppy disk drive
                            connector, IDE hard disk drive connector
Hard Drives supported       IDE(AT)
Floppy drives supported     360KB, 720KB, 1.2MB, 1.44MB
Data Bus                    16-bit ISA

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  15-pin analog video        CN1      IDE interface               CN5
  port

  Parallel port 1            CN2      Serial port 1               COM1

  Parallel port 2            CN3      Serial port 2               COM2

  Floppy drive interface     CN4

                        USER CONFIGURABLE SETTINGS

              Function                  Label            Position

  »   Factory configured - do not       JB1/B          Unidentified
      alter

  »   Factory configured - do not       JB1/C          Unidentified
      alter

  »   Factory configured - do not       JB1/D          Unidentified
      alter

  »   Factory configured - do not       JB1/E          Unidentified
      alter

  »   Factory configured - do not       JB1/F          Unidentified
      alter

  »   Factory configured - do not       JB1/G          Unidentified
      alter

  »   Factory configured - do not       JB1/H          Unidentified
      alter

  »   Factory configured - do not       JB1/I          Unidentified
      alter

  »   Factory configured - do not        JP1           Unidentified
      alter

  »   Factory configured - do not        JP2           Unidentified
      alter

                    USER CONFIGURABLE SETTINGS (CONT’D)

              Function                    Label            Position

  »   IRQ9 disabled                        JP4        Pins 1 & 2 closed

      IRQ9 enabled                         JP4        Pins 2 & 3 closed

  »   Fast address decode                 SW2/5              Off

      Slow address decode                 SW2/5               On

  »   16-bit data path                    SW2/6              Off

      8-bit data path                     SW2/6               On

        DRAM JUMPER CONFIGURATION

        Size                JB1/A

  256KB/512KB         Pins 2 & 3 closed

  1MB                 Pins 1 & 2 closed

                 VIDEO MEMORY CONFIGURATION (DRAM)

      Size            Bank 0           Bank 1          Bank 2

      265KB       (2) 256KB x 4         None            None

      512KB       (2) 256KB x 4    (2) 256KB x 4        None

       1MB        (2) 256KB x 4    (2) 256KB x 4    (4) 256KB x 4

             VIDEO MEMORY JUMPER CONFIGURATION

        Size           Label             Position

       256KB            JP5      Pins 1 & 2, 4 & 5 closed

       512KB            JP5      Pins 1 & 4, 2 & 5 closed

        1MB             JP5      Pins 2 & 3, 5 & 6 closed

                            BUS SIZE SELECTION

           Setting                 Label                Position

  »   Autodetect                    JP3            Pins 2 & 3 closed

      8-bit                         JP3            Pins 1 & 2 closed

                      PARALLEL PORT ADDRESS SELECTION

        Setting            IRQ        Label              Position

  LPT1 (378h) enabled     IRQ7        SW2/3                 Off

  LPT1 (378h) disabled    IRQ7        SW2/3                 On

  LPT2 (278h) enabled     IRQ5        SW2/1                 Off

  LPT2 (278h) disabled    IRQ5        SW2/1                 On

                      SERIAL PORT 1 ADDRESS SELECTION

        Setting            IRQ        Label              Position

  COM1 (3F8h) enabled     IRQ4        SW2/4                 Off

  COM1 (3F8h) disabled    IRQ4        SW2/4                 On

                      SERIAL PORT 2 ADDRESS SELECTION

        Setting            IRQ        Label              Position

  COM2 (2F8h) enabled     IRQ3        SW2/2                 Off

  COM2 (2F8h) disabled    IRQ3        SW2/2                 On

UNIDENTIFIED

SUPER COMBO VGA GRAPHICS ADAPTER

                                            … continued from previous page

                            SCAN RATE SELECTION

            Rate                    Label                 Position

  »   48KHz                         SW2/3                    On

      >= 48KHz                      SW2/3                   Off