UNIDENTIFIED

MT-201A

Card Type                  Multi I/O card
Chip Set                   Goldstar
Maximum Onboard Memory     Unidentified
I/O Options                Parallel printer port, serial ports (2), game
                           port, floppy drive interface
Floppy drives supported    Unidentified
Data Bus                   8-bit ISA

[Image]

                                CONNECTIONS

           Function             Label           Function           Label

  Parallel port                 CN1     Serial port 1              ASYN1

  9 pin digital video port      CN2     Serial port 2              ASYN2

  Floppy drive interface        CN3

                        USER CONFIGURABLE SETTINGS

                 Function                   Label          Position

  Game port enabled                          JP5            Closed

  Game port disabled                         JP5             Open

                      PARALLEL PORT ADDRESS SELECTION

         Setting                  Label                  Position

  LPT1 (378h)                      JP4           Pins 1 & 2, 3 & 4 closed

  LPT2 (278h)                      JP4           Pins 3 & 4, 7 & 8 closed

                    SERIAL PORT 1 ADDRESS SELECTION

           Setting              Label               Position

  COM1 (3F8h)                    JP6       Pins 1 & 2, 13 & 14 closed

  COM2 (3F8h)                    JP6       Pins 5 & 6, 11 & 12 closed

  COM3 (3F8h)                    JP6       Pins 3 & 4, 13 & 14 closed

  COM4 (3F8h)                    JP6       Pins 7 & 8, 11 & 12 closed

                       MISCELLANEOUS TECHNICAL NOTES

  Note: To enable port 2, IC’s 8250B, 75188, and 75189 must be installed.
  If JP6 is a 20-pin connector, then Pins 15 & 16, 19 & 20 closed
  activate COM2 and Pins 15 & 16, 17 & 19 closed activate COM4.