AMERICAN DATA AQUISITION CORPORATION

5801MF, 5802MF

Card Type               Data Aquisition
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             Analog input, digital input
Hard Drives supported   None
Floppy drives supported None
Data Bus                16-bit ISA
Card Size               Full-length

[Image]

                                CONNECTIONS

          Function             Label           Function           Label

  40-pin header to 37-pin        J1      DAC1 bipolar offset        P5
  analog/digital signals                 selector
  connector via cable

  40-pin header to 37-pin        J2      DAC1 range selector        P6
  analog/digital signals
  connector via cable

  50-pin analog/digital          J8      A/D converter              P7
  signals connector                      unipolar offset
                                         selector

  DAC0 unipolar offset           P1      A/D converter              P8
  selector                               bipolar offset
                                         selector

  DAC0 bipolar offset            P2      A/D converter              P9
  selector                               unipolar range
                                         selector

  DACO range selector            P3      A/D converter             P10
                                         bipolar range
                                         selector

  DAC1 unipolar offset           P4      A/D converter zero        P11
  selector                               selector

                     ANALOG INPUT RANGE CONFIGURATION

        Polarity              Range             JP1              JP2

  »        Bipolar         -10V to +10V      Pins 1 & 2      Pins 1 & 2

          Unipolar          0V to +10V       Pins 2 & 3      Pins 2 & 3

                        BASE I/O ADDRESS SELECTION

    Setting       SW1/1       SW1/2       SW1/3       SW1/4       SW1/5

        000h       Off         Off         Off         Off         Off

        020h       Off         Off         Off         Off         On

        040h       Off         Off         Off         On          Off

        060h       Off         Off         Off         On          On

        080h       Off         Off          On         Off         Off

  »     120h       Off          On         Off         Off         On

        360h        On          On         Off         On          On

        380h        On          On          On         Off         Off

        3A0h        On          On          On         Off         On

        3C0h        On          On          On         On          Off

        3E0h        On          On          On         On          On

                                   Note:

  A total of 32 base address settings are available. The switches are a
  binary representation of the decimal memory addresses. SW1/1 is the
  Most Significant Bit and jumper SW1/5 is the Least Significant Bit. The
  jumpers have the following decimal values: SW1/1=512, SW1/2=256,
  SW1/3=128, SW1/4=64, SW1/5=32. Turn off the switches and add the values
  of the switches to obtain the correct memory address. (On=1, 0ff=0)