AMERICAN DATA AQUISITION CORPORATION

5516CCI, 5632TTL

Card Type               Data Aquisition
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             Analog input, digital input
Hard Drives supported   None
Floppy drives supported None
Data Bus                8-bit ISA
Card Size               Half length

[Image]

                          CONNECTIONS

                 Function                         Label

  37-pin analog/digital signals connector           J3

            USER CONFIGURABLE SETTINGS

        Function           Label      Position

  Port A input enabled      W10        Closed

  Port A output enabled     W10         Open

  Port B input enabled      W11        Closed

  Port B output enabled     W11         Open

                        BASE I/O ADDRESS SELECTION

  Setting     W9       W8       W7       W6       W5       W4       W3

      000h   Open     Open     Open     Open     Open     Open     Open

      008h   Open     Open     Open     Open     Open     Open     Closed

      010h   Open     Open     Open     Open     Open     Closed   Open

      018h   Open     Open     Open     Open     Open     Closed   Closed

      020h   Open     Open     Open     Open     Closed   Open     Open

  »   110h   Open     Closed   Open     Open     Open     Closed   Open

      3D8h   Closed   Closed   Closed   Closed   Open     Closed   Closed

      3E0h   Closed   Closed   Closed   Closed   Closed   Open     Open

      3E8h   Closed   Closed   Closed   Closed   Closed   Open     Closed

      3F0h   Closed   Closed   Closed   Closed   Closed   Closed   Open

      3F8h   Closed   Closed   Closed   Closed   Closed   Closed   Closed

                                   Note:

  A total of 128 base address settings are available. The jumpers are a
  binary representation of the decimal memory addresses. Jumper W9 is the
  Most Significant Bit and jumper W3 is the Least Significant Bit. The
  jumpers have the following decimal values: W9=512, W8=256, W7=128,
  W6=64, W5=32, W4=16, W3=8. Turn off the switches and add the values of
  the switches to obtain the correct memory address.(Open=0, Closed=1)

                          IRQ INTERRUPT SELECTION

           IRQ                  JP1             JP2              JP3

             IRQ2              Open             Open          Pins 1 & 2
                                                               closed

             IRQ3              Open          Pins 1 & 2         Open
                                               closed

             IRQ4            Pins 1 & 2         Open            Open
                              closed

             IRQ5              Open             Open          Pins 2 & 3
                                                               closed

             IRQ6              Open          Pins 2 & 3         Open
                                               closed

             IRQ7            Pins 2 & 3         Open            Open
                              closed

  »        Disabled            Open             Open            Open