EMULEX CORPORATION

CONNECTPLUS DL

Card Type Serial card
Chip Set  Unidentified
Data Bus  16-bit ISA

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  9-pin serial port 1          CN1     9-pin serial port 2          CN2

                        USER CONFIGURABLE SETTINGS

                 Function                      Label          Position

  »   Factory configured – do not alter     J1/pins 1 &        Closed
      (software compatibility level)             2

  »   Factory configured – do not alter     J1/pins 3 &        Closed
      (control register 4)                       4

  »   Factory configured – do not alter     J1/pins 5 &        Closed
      (window group)                             6

  »   Factory configured – do not alter     J1/pins 7 &        Closed
      (memory size)                              8

                            INTERRUPT SELECTION

                  IRQ                                  J13

                   IRQ2                         Pins 1 & 2 closed

  »                IRQ3                         Pins 3 & 4 closed

                   IRQ4                         Pins 5 & 6 closed

                   IRQ5                         Pins 7 & 8 closed

                   IRQ10                       Pins 9 & 10 closed

                   IRQ11                       Pins 11 & 12 closed

                   IRQ12                       Pins 13 & 14 closed

                   IRQ15                       Pins 15 & 16 closed

                        BASE I/O ADDRESS SELECTION

     Setting         SW1/1         SW1/2          SW1/3         SW1/4

         03C           On            On            On             On

         07C          Off            On            On             On

         0BC           On           Off            On             On

         0FC          Off           Off            On             On

         13C           On            On            Off            On

         17C          Off            On            Off            On

         1BC           On           Off            Off            On

         1FC          Off           Off            Off            On

         23C           On            On            On            Off

         27C          Off            On            On            Off

         2BC           On           Off            On            Off

         2FC          Off           Off            On            Off

  »      33C           On            On            Off           Off

         37C          Off            On            Off           Off

         3BC           On           Off            Off           Off

         3FC          Off           Off            Off           Off

                        SERIAL PORT 1 DTE SELECTION

     Setting              J7                 J8                 J9

      RS-232        1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 6, 7 & 8

       V.35         1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 3, 2 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 7, 6 & 8

  Note: Pins designated should be in the closed position.

                    SERIAL PORT 1 DTE SELECTION (CON’T)

  Setting   SW3/1   SW3/2   SW3/3   SW3/4   SW3/5   SW3/6   SW3/7   SW3/8

  RS-232     On      On      On      On      On      On      On      Off

   V.35     Off     Off     Off     Off     Off     Off     Off      On

                        SERIAL PORT 2 DTE SELECTION

     Setting              J4                 J5                 J6

      RS-232        1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 6, 7 & 8

       V.35         1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 3, 2 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 7, 6 & 8

  Note: Pins designated should be in the closed position.

                    SERIAL PORT 2 DTE SELECTION (CON’T)

  Setting   SW2/1   SW2/2   SW2/3   SW2/4   SW2/5   SW2/6   SW2/7   SW2/8

  RS-232     On      On      On      On      On      On      On      Off

   V.35     Off     Off     Off     Off     Off     Off     Off      On

                        SERIAL PORT 1 DCE SELECTION

     Setting              J7                 J8                 J9

      RS-232        1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 6, 7 & 8

       V.35         1 & 3, 2 & 4, 5    1 & 3, 2 & 4, 5    1 & 3, 2 & 4, 5
                      & 7, 6 & 8         & 7, 6 & 8         & 7, 6 & 8

  Note: Pins designated should be in the closed position.

                    SERIAL PORT 1 DCE SELECTION (CON’T)

  Setting   SW3/1   SW3/2   SW3/3   SW3/4   SW3/5   SW3/6   SW3/7   SW3/8

  RS-232    Off      On      On      On      On      On      On      On

   V.35     Off     Off      On      On     Off      On      On      On

                        SERIAL PORT 2 DCE SELECTION

     Setting              J4                 J5                 J6

      RS-232        1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5    1 & 2, 3 & 4, 5
                      & 6, 7 & 8         & 6, 7 & 8         & 6, 7 & 8

       V.35         1 & 3, 2 & 4, 5    1 & 3, 2 & 4, 5    1 & 3, 2 & 4, 5
                      & 7, 6 & 8         & 7, 6 & 8         & 7, 6 & 8

  Note: Pins designated should be in the closed position.

                    SERIAL PORT 2 DCE SELECTION (CON’T)

  Setting   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

  RS-232    Off      On      On      On      On      On      On      On

   V.35     Off     Off      On      On     Off      On      On      On