LASAT COMMUNICATIONS A/S UNIQUE SAFIRE 144 Card Type Modem (asynchronous) Chipset Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation Unidentified Error Correction/Compression MNP5, MNP10, V.42, V.42bis Fax Class Class I & II Data Bus Serial [Image] CONNECTIONS Function Label Function Label Power connector CN1 Telephone in CN3 RS-232/422 CN2 DIAGNOSTIC LED(S) LED Color Status Condition ON Red On Power is on ON Red Off Power is off TR Red On DTR signal is high TR Red Off DTR signal is low DCD Red On Carrier signal detected DCD Red Off Carrier signal not detected DCD Red Blinking Phone is ringing COMP Red On Modem is connected with data compression COMP Red Off Modem is not connected with data compression SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z &C, &D, &F, &G, &K, &P, &R, &S, &T, &V, &W, &X, &Y, &Z Extended AT Commands \A, \B, \G, \J, \K, \L, \N, \W %C, %E, %F, %L, %Q Special AT Commands :E, *H, -K, )M, @M, -Q S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S16, S18, S24, S25, S26, S29, S30, S31 S32, S33, S36, S38, S39, S46, S48, S82, S86, S91, S95, S201 Note: See MHI help file for complete information. UNIDENTIFIED COMMANDS Command Default S14 Unidentified S21 Unidentified S22 Unidentified S23 Unidentified S27 Unidentified S28 Unidentified S37 Unidentified S40 Unidentified S41 Unidentified S80 Unidentified Proprietary AT Command Set PROTOCOL/SPEED Type: Configuration Format: AT [cmds] Fn [cmds] Description: Selects the protocol and speed the modem will attempt to connect at. Command Function F0 Auto-detect the highest common connect speed. F1 Select V.21 or Bell 103 at 300bps speed. F3 Select V.23 at 75/1200bps speed. F4 Select V.22 or Bell 212A at 1200bps speed. F5 Select V.22bis at 2400bps speed. F6 Select V.32 or V.32bis at 4800bps speed. F7 Select V.32bis at 7200bps speed. F8 Select V.32bis or V.32 at 9600bps speed. F9 Select V.32bis at 12Kbps speed. F10 Select V.32bis at 14.4Kbps speed. See LASAT COMMUNICATIONS A/S CREDIT 288 for a full command summary.