EICON TECHNOLOGY CORPORATION

EICONCARD S50

Card Type                    ISDN TA
Chip Set                     Motorola
Transfer Rate                2.048Mbps
ISDN Protocol                PPP, SDLC, HDLC
Error Correction/Compression Generic Lempel-Ziv
I/O Options                  Daughterboard headers
Switch Type                  Unidentified
Data Bus                     16-bit ISA

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  V.24, V.35, or X.21 via     CN1      Compression                 CN3
  DB-26 connector                      daughterboard header

  Compression                 CN2
  daughterboard header

                        USER CONFIGURABLE SETTINGS

                  Setting                       Label        Position

  »   V.24 or V.35 interface                     JP1         Pins 1 & 2
                                                              closed

      X.21 interface                             JP1         Pins 2 & 3
                                                              closed

  »   Card will use primary I/O address         SW1/1           Off

      Card will use secondary I/O address       SW1/1           On

            Note: A single-block jumper is provided for JP1. It closes
            all pins 1 & 2 or all pins 2 & 3 simultaneously.

                             BASE I/O ADDRESS

     Primary         Secondary        SW1/2        SW1/3         SW1/4

         278h          678h            Off          Off           Off

         280h          680h            Off          Off           On

         378h          778h            Off           On           Off

  »      380h          780h            Off           On           On

         380h          780h             On          Off           Off

         388h          788h             On          Off           On

         390h          790h             On           On           Off

         398h          798h             On           On           On

            Note: If a card is set to use a secondary address, no other
            card in the system may be set to its associated primary
            address except for another EiconCard.