LUCENT TECHNOLOGIES
RTNI-ATI/ASI
Card Type Telephony
Chip Set Unidenified
I/O Options MVIP bus
Data Bus 16-bit ISA
[Image]
CONNECTIONS
Function Label Function Label
MVIP bus J1 Telephone lines out J4
48V DC power J2 Line modules J10-J33
48V DC power J3
BASE I/O ADDRESS
Setting E1/A E1/B E1/C E1/D E1/E E1/F E1/G E1/H E1/I E1/J
000h Closed Closed Closed Closed Closed Closed Closed Closed Closed Closed
001h Closed Closed Closed Closed Closed Closed Closed Closed Closed Open
002h Closed Closed Closed Closed Closed Closed Closed Closed Open Closed
003h Closed Closed Closed Closed Closed Closed Closed Closed Open Open
004h Closed Closed Closed Closed Closed Closed Closed Open Closed Closed
» 308h Open Open Closed Closed Closed Closed Open Closed Closed Closed
3FBh Open Open Open Open Open Open Open Closed Open Open
3FCh Open Open Open Open Open Open Open Open Closed Closed
3FDh Open Open Open Open Open Open Open Open Closed Open
3FEh Open Open Open Open Open Open Open Open Open Closed
3FFh Open Open Open Open Open Open Open Open Open Open
Note: A total of 2047 base address settings are available. The jumpers are a binary
representation of the decimal memory addresses. E1/A is the Most Significant Bit and
jumper E1/J is the Least Significant Bit. The jumpers have the following decimal
values: E1/A=512, E1/B=256, E1/C=128, E1/D=64, E1/E=32, E1/F=16, E1/G=8, E1/H=4,
E1/I=2, E1/J=1. Open the jumpers and add the values of the open jumpers to obtain the
correct memory address. (Open=1, Closed=0)
MVIP BUS TERMINATION
Setting W1 W2
» Terminated Closed Closed
Not terminated Open Open