LUCENT TECHNOLOGIES
RDSP/9232-I
Card Type Telephony
I/O Options Telephone in/out (2)
Data Bus 16-bit ISA
[Image]
CONNECTIONS
Function Label Function Label
Daisy-chain connector J1 Audio out J6
Line 1 J2 Analog signal ground W11
Line 2 J3 Digital signal ground W12
BASE I/O ADDRESS
Setting W1/A W1/B W1/C W1/D W1/E W1/F W1/G W1/H W1/I W1/J
000h Closed Closed Closed Closed Closed Closed Closed Closed Closed Closed
001h Closed Closed Closed Closed Closed Closed Closed Closed Closed Open
002h Closed Closed Closed Closed Closed Closed Closed Closed Open Closed
003h Closed Closed Closed Closed Closed Closed Closed Closed Open Open
004h Closed Closed Closed Closed Closed Closed Closed Open Closed Closed
» 300h Open Open Closed Closed Closed Closed Closed Closed Closed Closed
3FBh Open Open Open Open Open Open Open Closed Open Open
3FCh Open Open Open Open Open Open Open Open Closed Closed
3FDh Open Open Open Open Open Open Open Open Closed Open
3FEh Open Open Open Open Open Open Open Open Open Closed
3FFh Open Open Open Open Open Open Open Open Open Open
Note: A total of 1023 base address settings are available. The jumpers are a binary
representation of the decimal memory addresses. W1/A is the Most Significant Bit and
jumper W1/J is the Least Significant Bit. The jumpers have the following decimal
values: W1/A=512, W1/B=256, W1/C=128, W1/D=64, W1/E=32, W1/F=16, W1/G=8, W1/H=4,
W1/I=2, W1/J=1. Open the jumpers and add the values of the open jumpers to obtain the
correct memory address. (Open=1, Closed=0)