U.S. ROBOTICS, INC. SPORTSTER 56K VOICE FAXMODEM (EXTERNAL) Card Type Modem (asynchronous) Chipset U.S. Robotics, Inc. I/O Options Voice, speakerphone, speaker out Maximum Data Rate 56Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 U.S. Robotics x2 Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis Fax Class Class I & II Data Bus Serial [Image] CONNECTIONS Function Label Function Label AC power in CN1 Serial port CN5 Telephone line in CN2 Power switch SW1 Telephone line out CN3 Volume VR1 Speaker out CN4 DIAGNOSTIC LED(S) LED Color Status Condition AA Unidentified On Auto-answer enabled AA Unidentified Off Auto-answer disabled AA Unidentified Blinking Phone is ringing CD Unidentified On Carrier signal detected CD Unidentified Off Carrier signal not detected CD Unidentified Blinking Modem is retraining SD Unidentified On Modem is transmitting data SD Unidentified Off Modem is not transmitting data RD Unidentified On Modem is receiving data RD Unidentified Off Modem is not receiving data DIAGNOSTIC LED(S) (CON'T) LED Color Status Condition TR Unidentified On DTR signal is high TR Unidentified Off DTR signal is low CS Unidentified On CTS signal is high CS Unidentified Off CTS signal is low ARQ/FAX Unidentified On Modem is connected in error correction mode ARQ/FAX Unidentified Off Modem is not connected in error correction mode ARQ/FAX Unidentified Blinking Modem is connected in FAX mode or modem is retransmitting data due to errors Note: The locations of the LEDs are unidentified. MISCELLANEOUS TECHNICAL NOTES A front panel diagram is not available. SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, B, D, E, F, H, L, M, O, P, T, V, X, Z &C, &D, &F, &G, &P, &R, &S, &T, &W S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S38 Note: See MHI help file for complete information. Proprietary AT Command Set See U.S. ROBOTICS SPORTSTER 56K FAXMODEM (INTERNAL) for a full command summary.