ZOLTRIX, INC. FM-HSP336I Card Type Modem (asynchronous) Chipset PCtel HSP/V.34+ I/O Options Voice, speakerphone Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, V.42, V.42bis Fax Class Class I Data Bus 16-bit ISA Card Size Full height, half length [Image] CONNECTIONS Function Label Function Label Telephone line out CN1 Telephone line in CN2 SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z &C, &D, &F, &G, &K, &P, &S, &T, &W, &Y, &Z Extended AT Commands \A, \B, \G, \K, \L, \N %C, %L, %Q Special AT Commands #CID S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30, S32, S33, S38, S86, S91 Note: See MHI help file for complete information. UNIDENTIFIED COMMANDS Command Default S34 13 Proprietary AT Command Set AUTO-RETRAIN - AUTO-FALLBACK/FALL-FORWARD Type: Configuration Format: AT [cmds] %En [cmds] Description: Controls auto-retrain mode and fallback/fall-forward. Command Function %E0 Auto-retrain disabled. %E1 Auto-retrain enabled. %E2 Auto-retrain and auto-fallback/fall-forward enabled. %E3 Auto-retrain and fast hangup enabled. COMMUNICATION PROTOCOLS Type: Configuration Format: AT [cmds] Bn [cmds] Description: Selects the communication protocol for low-speed data calls. Command Protocol B0 Modem will use ITU-T V.22 at 1200bps. B1 Modem will use Bell 212A at 1200bps. B2 Modem will use ITU-T V.23 at 1200/75bps. COUNTRY CODE Type: Configuration Format: AT [cmds] %In [cmds] Description: Sets the modem's country code to the country specified. Command Function %I1 Set country code for the United States. %I2 Set country code for France. %I3 Set country code for Germany. %I4 Set country code for Italy. %I5 Set country code for Sweden. %I6 Set country code for the United Kingdom. %I7 Set country code for Japan. %I8 Set country code for Australia. %I9 Set country code for Spain. %I10 Set country code for Taiwan. %I11 Set country code for Singapore. %I12 Set country code for Korea. %I13 Set country code for Switzerland. %I14 Set country code for Norway. %I15 Set country code for the Netherlands. %I16 Set country code for Belgium. %I17 Set country code for Canada. %I18 Set country code for Ireland. %I19 Set country code for Portugal. COUNTRY CODE (CON'T) Command Function %I20 Set country code for Poland. %I21 Set country code for Hungary. %I22 Set country code for Finland. %I23 Set country code for Denmark. CPU ALLOCATION Type: Configuration Format: AT [cmds] %Nn [cmds] Default: 7 Range: 0 - 9 Unit: 10% of total CPU time Description: Selects the maximum amount of CPU processing time the modem will use. Setting %N to 0 disables dynamic CPU allocation. DIAL Type: Immediate Format: AT [cmds] D<#>;[cmds] Description: Dials the telephone number indicated according to any modifiers included in the string. Command Function DL Re-dial last number. DS=n Dial stored telephone number n. DW Dialing resumed following dial tone detection. D, Dialing paused for amount of time specified in S8 register. D! Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook. D@ Wait for Quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string. D^ Calling tone enabled for this call. D; Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command. DISPLAY CHIPSET MANUFACTURER Type: Immediate Format: AT [cmds] #MFR? [cmds] Description: Displays the voice chipset manufacturer’s name. DISPLAY CHIPSET MODEL NAME Type: Immediate Format: AT [cmds] #MDL? [cmds] Description: Displays the model name of the modem's voice chipset. DISPLAY CHIPSET REVISION Type: Immediate Format: AT [cmds] #REV? [cmds] Description: Displays the revision level of the modem's voice chipset. DISPLAY INFORMATION Type: Immediate Format: AT [cmds] In [cmds] Description: Displays information requested about the modem. Command Function I0 Displays product identification code. I1 Displays hardware variation code. I2 Displays internal code. I3 Displays firmware revision. I4 Displays feature bitmap. DISPLAY PROFILES Type: Immediate Format: AT [cmds] &Vn [cmds] Description: Displays the stored profile requested. Command Function &V0 Displays the active profile. &V1 Displays stored profiles. &V2 Displays phone numbers stored with the &Z command. ESCAPE SEQUENCE - INVALID SEQUENCE Type: Configuration Format: AT [cmds] *Qn [cmds] Description: Sets the modem's response when an invalid TIES escape sequence is entered, but the OK response code has already been sent. Command Function *Q0 Modem returns CONNECT response. *Q1 Modem does not return CONNECT response. LINE SPEED Type: Register Format AT [cmds] S37=n [cmds] Description: Sets the maximum allowable data exchange rate attempted during handshake process. Command Function S37=0 Auto-detect fastest common speed. S37=3 Set speed to 300bps. S37=4 Set speed to 1200bps. S37=6 Set speed to 2400bps. S37=7 Set speed to 4800bps. S37=8 Set speed to 7200bps. S37=9 Set speed to 9600bps. S37=10 Set speed to 12Kbps. S37=11 Set speed to 14.4Kbps. S37=12 Set speed to 28.8Kbps. MODE SELECTION Type: Immediate Format: AT [cmds] #CLS=n [cmds] Description: Selects which mode the modem will operate in. Command Function #CLS=0 Modem will operate in data mode. #CLS=1 Modem will operate in fax class 1 mode. #CLS=8 Modem will operate in voice mode. TEST MODE - PTT Type: Immediate Format: AT [cmds] %Pnn [cmds] Description: Send PTT test signals for line tests. Command Function %P00 Send DTMF digit 0. %P01 Send DTMF digit 1. %P02 Send DTMF digit 2. %P03 Send DTMF digit 3. %P04 Send DTMF digit 4. %P05 Send DTMF digit 5. %P06 Send DTMF digit 6. %P07 Send DTMF digit 7. %P08 Send DTMF digit 8. %P09 Send DTMF digit 9. %P10 Send DTMF digit A. %P11 Send DTMF digit B. %P12 Send DTMF digit C. %P13 Send DTMF digit D. %P14 Send DTMF digit *. TEST MODE - PTT (CON'T) Command Function %P15 Send DTMF digit #. %P16 Send V.21 channel 1 mark symbol. %P17 Send V.21 channel 2 mark symbol. %P18 Send V.23 backward channel mark symbol. %P19 Send V.23 forward channel mark symbol. %P20 Send V.22 originate mark symbol. %P21 Send V.22bis originate mark symbol. %P22 Send V.22 answer signal with guard tone if required. %P23 Send V.22bis answer signal with guard tone if required. %P24 Send V.21 channel 1 space symbol. %P25 Send V.21 channel 2 space symbol. %P26 Send V.23 backward channel space symbol. %P27 Send V.23 forward channel space symbol. %P28 Send V.32 9600bps carrier. %P29 Send V.32bis 14.4Kbps carrier. %P30 Send silence (on-line), i.e., go off-hook. %P31 Send V.25 answer tone. %P32 Send 1800 Hz guard tone. %P33 Send 1300Hz V.25 calling tone. %P34 Send 1100Hz fax calling tone. %P35 Send V.21 channel 2 mark symbol. %P36 Send V.27ter 2400bps carrier. %P37 Send V.27ter 4800bps carrier. %P38 Send V.29 7200bps carrier. %P39 Send V.29 9600bps carrier. %P40 Send V.17 7200bps long train carrier. %P41 Send V.17 7200bps short train carrier. %P42 Send V.17 9600bps long train carrier. %P43 Send V.17 9600bps short train carrier. %P44 Send V.17 12Kbps long train carrier. %P45 Send V.17 12Kbps short train carrier. %P46 Send V.17 14.4Kbps long train carrier. %P47 Send V.17 14.4Kbps short train carrier. %P48 Send V.34 2400bps carrier. %P49 Send V.34 4800bps carrier. %P50 Send V.34 7200bps carrier. %P51 Send V.34 9600bps carrier. %P52 Send V.34 12Kbps carrier. %P53 Send V.34 14.4Kbps carrier. %P54 Send V.34 16.8Kbps carrier. %P55 Send V.34 19.2Kbps carrier. %P56 Send V.34 21.6Kbps carrier. %P57 Send V.34 24Kbps carrier. %P58 Send V.34 26.4Kbps carrier. TEST MODE - PTT (CON'T) Command Function %P59 Send V.34 28.8Kbps carrier. %P60 Send V.32bis 9600bps carrier. %P61 Send V.32bis 12Kbps carrier. %P62 Send Bell 212A originate carrier. %P63 Send Bell 212A answer carrier. %P64 Send Bell 103 originate mark signal. %P65 Send Bell 103 originate space signal. %P66 Send Bell 103 answer mark symbol. %P67 Send Bell 103 answer space symbol. %P99,n Range: 0 - 23 Unit: 150 Hz Description: The modem will return the strength of the signal at the specified frequency. SPEAKERPHONE OPTIONS Type: Configuration Format: AT [cmds] #SPK=x,y,z [cmds] Description: Sets various options for speakerphone functions. Command Function x=0 Microphone enabled. x=1 Microphone disabled. x=2 Microphone enabled with maximum gain, speaker disabled. y Default: 5 Range: 0 - 16 Unit: -2 dBm Description: Sets the attenuation level for speaker output in voice mode. A value of 16 will mute the speaker. z=0 Microphone gain set to 0 dBm. z=1 Microphone gain set to 6 dBm. z=2 Microphone gain set to 9.5 dBm. z=3 Microphone gain set to 12 dBm. TONE DETECTION Format: AT [cmds] #VTD=x,y,z [cmds] Default: x,y,z 63 Range: 0 - 63 Description: Sets which tones the tone detection will report. Note: The value of x sets the tone detection modes in voice transmit mode, y sets them in voice receive mode, and z sets them in voice command mode. Bit Value Function 0 0 DTMF tones are not detected. 1 DTMF tones are detected. 1 0 V.25 1300Hz calling tone is not detected. 1 V.25 1300Hz calling tone is detected. 2 0 T.30 1100Hz fax tone is not detected. 1 T.30 1100Hz fax tone is detected. 3 0 V.25/T.30 2100Hz answer tone is not detected. 1 V.25/T.30 2100Hz answer tone is detected. 4 0 Bell 2225Hz answer tone is not detected. 1 Bell 2225Hz answer tone is detected. 5 0 Call progress tones are not detected. 1 Call progress tones are detected. TONE GENERATOR - DIRECT ENTRY Type: Immediate Format: AT [cmds] #VTS=[m, n, x] Range: m 200-3000, n 200-3000, x 0-255 Unit: m 1 Hz, n 1 Hz, x .1 second Description: Generates a dual-frequency tone for duration x at frequencies m and n. TONE GENERATOR - TIMED PHONE KEYS Type: Immediate Format: AT [cmds] #VTS={a, n} Range: a 0-9, A-D, #, *; x 0-255 Unit: x .1 second Description: Generates the DTMF tone for duration x for the character a. TONE GENERATOR LENGTH Format AT [cmds] #VBT=n [cmds] Default: 10 Range: 0 - 40 Unit: 0.1 second Description: Sets the length of DTMF tones that are generated. TRELLIS CODING Type: Configuration Format: AT [cmds] &Un [cmds] Description: Selects whether the modem will use trellis coding. Command Function &U0 Trellis coding enabled. &U1 Trellis coding disabled. V.34 BAUD RATE Type: Configuration Format: AT [cmds] S35=n [cmds] Description: Sets the maximum baud rate for V.34. Command Function S35=0 Maximum baud rate set to 2400 baud. S35=1 Maximum baud rate set to 2743 baud. S35=2 Maximum baud rate set to 2800 baud. S35=3 Maximum baud rate set to 3000 baud. S35=4 Maximum baud rate set to 3200 baud. S35=5 Maximum baud rate set to 3429 baud. VOICE BUFFER SPACE Type: Configuration Format: AT [cmds] #VSK=n [cmds] Default: 255 Range: 0 - 255 Unit: 1 byte Description: Sets the amount of data the modem can send into the buffer after the XOFF signal is sent. VOICE DEVICE Type: Configuration Format: AT [cmds] #VLS=n [cmds] Description: Selects the I/O device for the DSP chip. Note: This modem may not support all options listed below. The #VLS? command will display the available options. Command Function #VLS=0 Telephone line and handset used for voice I/O. #VLS=1 Telephone handset used for voice I/O. #VLS=2 Internal speaker only used for voice I/O. #VLS=3 External microphone only used for voice I/O. #VLS=4 Telephone line and handset used for voice I/O; internal speaker enabled. #VLS=6 Speakerphone used for voice I/O. VOICE - DISPLAY BUFFER SIZE Type: Immediate Format: AT [cmds] #VBQ? [cmds] Description: Displays the size of the voice buffer. VOICE - DISPLAY COMPRESSION TYPE Type: Immediate Format: AT [cmds] #VCI? [cmds] Description: Displays the type of compression currently in use. VOICE GAIN LEVEL Type: Configuration Format: AT [cmds] #RG=hhhh [cmds] Default: 7FFF Range: 0000 - 7FFF Unit: Unidentified (hexadecimal) Description: Sets the gain level for recording audio in voice mode. VOICE - LOCAL SERIAL PORT SPEED Type: Configuration Format: AT [cmds] #BDR=n [cmds] Default: 0 Range: 0 - 48 Unit: 2400bps Description: Sets the speed of the local serial port when in voice mode. A value of 0 indicates that the modem should auto-detect the correct serial port speed. VOICE RE-RING DETECT TIME Type: Configuration Format: AT [cmds] #VRA=n [cmds] Default: 70 Range: 0-255 Unit: 10 mS Description: Sets the maximum time the modem will wait for the remote station to ring again before it assumes that it has gone off-hook. VOICE RECEIVE Type: Immediate Format: AT [cmds] #VRX Description: Commands the modem to begin receiving voice data. VOICE RING DETECT TIME Type: Configuration Format: AT [cmds] #VRN=n [cmds] Default: Unidentified Range: Unidentified Unit: Unidentified Description: Sets the maximum time the modem will wait for the remote station to ring before it assumes that it went off-hook before it rang. VOICE SILENCE DETECTION TIME Type: Configuration Format: AT [cmds] #VSP=n [cmds] Default: Unidentified Range: 0 - 255 Unit: .1 second Description: Sets the minimum amount of silence that the modem will detect. VOICE SILENCE DETECTION THRESHOLD Type: Configuration Format: AT [cmds] #VSS=n [cmds] Description: Sets the threshold of sensitivity that the modem uses to determine silence detection. Command Function #VSS=0 Silence detection disabled. #VSS=1 Minimum silence detection sensitivity. #VSS=2 Standard silence detection sensitivity. #VSS=3 Maximum silence detection sensitivity. VOICE TRANSMISSION LEVEL Type: Configuration Format: AT [cmds] #TL=hhhh [cmds] Default: 3FFF Range: 0000 - 7FFF Unit: Unidentified (hexadecimal) Description: Sets the transmission level for sending audio in voice mode. VOICE TRANSMIT Type: Immediate Format: AT [cmds] #VTX Description: Commands the modem to begin transmitting voice data.