GTEK, INC.

SMARTCARD-8

Card Type               Serial card
Chip Set                Unidentified
Maximum Onboard Memory  Unidentified
I/O Options             Serial ports (8 RS-232)
Hard Drives supported   None
Floppy drives supported None
Data Bus                16-bit ISA
Card Size               Half-length, full-height card

[Image]

                                CONNECTIONS

          Function            Label            Function            Label

  Serial port via RJ-45        J1      Serial port via RJ-45        J5
  connector                            connector

  Serial port via RJ-45        J2      Serial port via RJ-45        J6
  connector                            connector

  Serial port via RJ-45        J3      Serial port via RJ-45        J7
  connector                            connector

  Serial port via RJ-45        J4      Serial port via RJ-45        J8
  connector                            connector

         BASE I/O ADDRESS SELECT

   Setting     JB4/A     JB4/B    JB4/C

    2E0h        Open     Open      Open

    2E4h       Closed    Open      Open

    210h        Open     Closed    Open

    214h       Closed    Closed    Open

    218h        Open     Open     Closed

    21Ch       Closed    Open     Closed

    220h        Open     Closed   Closed

     N/A       Closed    Closed   Closed

  SERIAL PORT INTERRUPT SELECTION

       IRQ               JB3

      IRQ2          JP3/E closed

      IRQ3          JP3/D closed

      IRQ5          JP3/C closed

      IRQ10         JP3/B closed

      IRQ12         JP3/A closed

                       MISCELLANEOUS TECHNICAL NOTES

  To configure Guardian Watchdog™ system:

  a) Plug supplied jumper cable onto bottom two pins of JB1 and plug
  other end onto reset jumper of mother-board.

  b) Plug reset button cable onto top two pins of JB1.