LAVA COMPUTER MANUFACTURING, INC. MULTIFUNCTION BOARD Card Type Multifunction Chip Set Unidentified Maximum Onboard Memory 512KB DRAM I/O Options Parallel port, serial port Hard Drives supported None Floppy drives supported None Data Bus 8-bit ISA Card Size Full-length, full-height [Image] CONNECTIONS Function Label Function Label 26-pin parallel port CN1 25-pin serial port CN2 USER CONFIGURABLE SETTINGS Function Label Position » Parity check enabled J4 Closed Parity check disabled J4 Open » Real Time Clock enabled J9 Closed Real Time Clock disabled J9 Open DRAM CONFIGURATION Size Bank 0 Bank 1 Bank 2 64KB 64KB None None 128KB 64KB 64KB None 192KB 64KB 64KB 64KB 256KB 256KB None None 320KB 256KB 64KB None 384KB 256KB 64KB 64KB 512KB 256KB 256KB None Note:Size of chips is unidentified. DRAM JUMPER CONFIGURATION Size SW/4 SW/5 SW/6 None On On On 64KB On On Off 128KB On Off On 192KB On Off Off 256KB Off On On 320KB Off On Off 384KB Off Off On 512KB Off Off Off STARTING MEMORY ADDRESS CONFIGURATION Starting Maximum RAM on LAVA SW/1 SW/2 SW/3 Address Multifunction Board 64KB 512KB On On On 128KB 512KB On On Off 192KB 512KB On Off On 256KB 384KB On Off Off 320KB 320KB Off On On 384KB 256KB Off On Off 448KB 192KB Off Off On 512KB 128KB Off Off Off PARALLEL PORT ADDRESS SELECTION Setting J7 J8 LPT1 (378h) Closed Open LPT2 (278h) Open Closed Disabled Open Open Note: When IBM Monochrome Display/Printer adapter is installed in the system, the parallel port will automatically be reconfigured to LPT2 if the original setting was LPT1 and to LPT3 if the original setting was LPT2. SERIAL PORT ADDRESS SELECTION Setting J5 J6 » COM1 (3F8h) Closed Open COM2 (2F8h) Open Closed Disabled Open Open SERIAL PORT INTERRUPT SELECTION IRQ J2(pins 1 & 2) J3(pins 2 & 3) » IRQ4 (COM1) Open Closed IRQ3 (COM2) Closed Open PARALLEL PORT INTERRUPT SELECTION IRQ7 J1 Enabled Closed Disabled Open MISCELLANEOUS TECHNICAL NOTES The LAVA Multifunction Board requires switch settings on system board for PC-1, PC-2 and PC-XT. On PC-1 and PC-2 switches are set to represent total amount of memory installed. On PC-XT, switches represent amount of memory installed on system board only and do not include memory on Lava Multifunction Board.